Screw Drivers : A screw driver is a hand tool or power tool used to drive (insert) or remove screws. It works by applying rotational force (torque) through its tip, which fits into the screw head. Sizes: 1/4' hexagonal drive with maximum torque capacity of approximately 16 Nm.

Under Hand Crimping Tools, put text : PL series: Fitted with jaws, Sapsons hand-operated plier-type PL series crimping tools are designed to have better metal-to-metal contact between wires and non-insulated cable terminal ends. Size: 0.5 sq. mm to 16.0 sq. mm GD series: Sapsons GD series bench-type hand crimping tool is suitable for bench-mounted crimping and production line applications. Size: 10 sq. mm to 185 sq. mm GP series: Sapsons GP series mechanical gear-powered hand-operated crimping tool is a multi-stroke tool with ratchet & pin lock, and a rapid motion with maximum handle opening of 90°. This lightweight yet sturdy tool comes with interchangeable hex-type dies and is incredibly handy for carrying out tasks in a remote setting. Size: 25 sq. mm to 400 sq. mm

Impact Drivers : An impact driver is a power tool designed for driving screws and bolts with high torque by delivering rapid, strong rotational impacts. Unlike regular drills, impact drivers combine rotational force with quick bursts of concussive force (impacts) to loosen or drive fasteners more efficiently. Sizes: 1/4' hexagonal drive with maximum torque capacity of approximately 270 Nm.

Ratchet Wrench : A ratchet wrench is a hand tool used to tighten or loosen nuts and bolts efficiently without having to lift and reposition the tool after each turn. It features a ratcheting mechanism that allows the handle to move back and forth while the socket stays engaged with the fastener. Sizes: 3/8' to 1/2' square drive with maximum torque capacity of approximately 120 Nm.

It is a Shaft consist of Inner Core ,Outer casing Motor Coupling and Hand piece. It is designed to penetrate in to the tube inner dia, flexibly even into the bend tubes, without damaging the inner surface of the tube, and capable of transmitting rotary power from the Power unit to the tool head or brush. INNER WIRE CORE is flexible shaft's most important working element. It is designed and constructed to meet power drive operating conditions that include torque, speed, length and minimum bend radius. At the centre of the core is a single wire around which successive multi-stranded layers of wires are wrapped. Each layer is wound in the opposite direction and at right angles to the layer directly beneath it. The direction in which the wire on the outer most layer is wound determines the direction in which the shaft is designed to rotate. OUTER CASTING made of galvanized steel strip and is internally reinforced with antifriction lining to support the wire core and resist the torque. Outer casing does not rotate but protect the inner core and the tube inner dia. HANDPIECE is attached to one end of the shaft, either detachable or fixed type, with threaded spindle to connect tool heads or brushes. MOTOR COUPLING is fitted to the other end of the shaft, either threaded type or shear pin type, connected to the main power unit. Available in 25mm(1”) , 32mm(1.1/4”) and 36mm(1.3/8”) OD with 12mm(1/2”),16mm (5/16”) and 19 mm(3/4”) inner core respectively, with various length of 6 to 22 mtrs. Long. Longer length is also available on request.

A foot operated switch is a pedal-style control device used to activate or deactivate machines, tools, or electrical equipment using your foot. These tools are designed to improve workflow efficiency, precision, and safety, especially in hands-busy environments like workshops, factories, medical facilities, and construction sites.

Sapsons air to water intensifier/hydro pneumatic reciprocating pumps are an efficient, low cost alternative to motorised and hand-operated pumps. Salient Features: - Compact & lightweight, and can be mounted in any orientation - Low air consumption when used in conjunction with a low pressure, high discharge centrifugal prefill pump and hence, the energy consumption and time for building desired pressure is very low (There is no further consumption of compressed air once the pressure has built up) - Automatic leakage compensation to maintain set pressure - Pneumatically actuated components allow for usage even in explosive environments - Designed for use with water and other non-corrosive liquids as all parts that are in contact with the liquid are made from stainless steel and brass - Suction port can be rotated 360° for easy installation, and non-return valve assembly can be easily dismantled for quick servicing Applications - Hydrostatic pressure testing of castings, valves, hoses, pressure vessels etc. - Cyclic pressure or life testing of pressure guages, pressure switches, hoses etc. - Burst strength testing of pressured vessels such as LPG/nitrogen/oxygen gas cylinders, storage tanks, hoses, pipes etc. - Seat leakage test of control valves - Operation of single acting hydraulic cylinders used in hydraulic clamps, lifting platforms, compression moulding presses etc. - Isotactic pressing of powder metals and ceramics - Transferring of liquids from barrels, storage tanks etc. - Pumping oil/grease in centralised lubrication systems"

SAPSONS Double-Ended Ratchet Spanner with Hex / Bi-Hex drive at both ends is a very useful tool for productivity. Used for loosening & tightening of bolts / nuts without detaching / resetting the tool, due to its in-built Ratcheting mechanism, these tools helps to reduce the operator fatigue and increase the comfort. The range covers across flat sizes 8 mm to 24 mm and 5/16″ to 1″. We also manufacture Single End Heavy duty Female Hex, Bi-Hex and Square Drive RATCHET WRENCHES with the A/F sizes of upto 3” with long Handle for the maintenance of Turbines, Ships, and for various applications. Very Useful in general engineering industry, automobile Industries , Thermal, Gas and Hydel Power plants and mass production and servicing industries. Special Sizes as per customer requirement can be also made on request.

The Clean cut solution to removing frozen nuts. Hydraulic Nut Splitter is very useful tool for Processing Industries like Pharmaceuticals, Chemical plants, Fertilizers etc, where the atmosphere is corrosive or Industries which located near Sea-shore. In both the cases, the Fasteners often get corroded, and during routine maintenance or preventive maintenance, it is very difficult to open the Nuts, by manually or thru impact applications. SAPSONS Nut Splitters offer end to end solution of cutting frozen nuts, in such situation. Our Nut Splitter Tool is effectively used for removing heavily corroded, seized nuts quickly, quietly and safely without damaging the bolt and stud threads. Sapsons Nut-Splitter now you can easily remove heavily corroded, seized nuts quickly, quietly and safely. Fast : To remove a 90 mm nut with a torch or hammer and chisel might take upto 30 minutes. But yoy only need 20-30 seconds with our Sapsons Nut Splitter. Safe: No hammer, no impact. Operator has hands off during operation. No sparks, No Flames, No risk to volatile environments. Sapsons Nut Splitter cuts smoothly, with no flying fragments. Quiet : All you will hear is the hiss of the hydraulic pump and a reassuring " snap" when the nut is split. Precise: You can easily calibrate the cutting chisel so only the nut is split, with no damage to the bolt or stud threads. Versatile : SAPSONS NUT SPLITTER cuts through even the hardest nuts, including ASTMA194 Brinell hardness 248-352. And each model of SAPSONS NUT SPLITTER can be used for a wide range of metric or inch nut sizes. It Saves You Money : Nut removal takes less time, so downtime is reduced. And with SAPSONS NUT SPLITTER, you can avoid costly damage to bolts, studs and surrounding equipment.