Model No. Voltage 50/60 Hz Weight Approx.(kg.) SWP-110 110V 7.5 SWP-230 230V 7.5 Tube expansion job is very critical and important process in manufacturing Heat Exchangers, Condensers and coolers, which plays vital role in the performance of the equipment. Being one of the final stage applications, over expansion as well as under expansion will lead to the rejection of equipment, thus resulting into loss of valuable man hours and material cost. SAPSONS Wattage Based Fully Automatic digital display Micro controller based Torque control Panel is designed to achieve the expansion within the acceptable parameter, at ease. It ensures the uniform drive power, irrespective of any voltage fluctuations, and transfers the same torque value to the tube expander, in every cycle and expands all the tubes equally. Features : Ø Our Digital Wattage based Torque Controller is Solid state Design without any loose parts, thus noiseless and long life. Ø User friendly Design with latest micro controller chip and One Single main circuit board for easy maintenance. Ø Protection from auto start of drive, in case of power failure, to ensure the safety of operator. Ø Digital torque settings calibrated very accurately (Resolution 1 watt ) for precise torque setting and repetitive uniform expansion. Ø Unique slow start feature enables the long life of carbon brush and the electric drive. Ø Auto recognition of Connected drive thru LED display in the panel and respective wattage range is programmed automatically , to avoid over loading. Ø Setting wattage , drive current, line voltage and drive actual wattage or either displayed or can be seen thru manual press button. Ø Trip , reverse and pause time can be adjusted as per requirement, and emergency manual reverse thru push button. Ø Options for Operation of Drive is available thru Foot or Hand . Ø Both Single cycle mode ( Forward , trip & reverse ) and Auto repeat mode ( Forward , Trip, Reverse with pre-set time, Pause with pre-set time and again repeating the cycle ) is available for the convenience of Tube expansion. Ø Physical operative condition of the drive can be seen thru LED indicators. ( i.e.. forward, reverse and trip) Ø In-built Short circuit protection and Miniature Circuit Breaker (MCB) provides the protection of both Panel and drive against voltage fluctuation or short circuits. Ø Very easy to replace the main PCB by any one. Ø Designed to work between 180 to 270 volts. Ø In-built design to protect the drive from overloading ( Drawing more current). Ø Automatic digital display warning in case of tripping . Ø User friendly design to replace the spares instantly, to minimise the downtime.

Hydraulic tube pullers can be used for both continuous tube pulling as well as stub pulling. Consists of - Hydraulic power pack - Pulling gun - Hose and other consumable accessories. Salient Features - Removes tubes without any damage to tube sheet - Interchangeable pulling gun with the same power pack - Compact design of pulling gun and power pack - Available for continuous pulling of up to 3" OD, and stub pulling of up to 4" OD - Saves time and money Tube Size: 3/8" - 3" (9.5 - 75 mm) OD for continuous pulling

Under Tube-End Facing / Chamfering Machines, replace text with: Sapsons SFM series tube end facing / chamfering machines are powerful yet portable machines designed to self-align and mount on tubes for fast tube-end facing and chamfering in constrained spaces. These are ideal for trimming condenser, chiller, and heat exchanger tubes to a specific tube projection after expansion. Salient Features - Light, portable, modular and ergonomic design - User-friendly experience due to quick interchangability of pilot - Range of tool bits available for tube-end facing, bevelling (internal and external) and weld seam machining - Available in electric, hydraulic and pneumatic drives - Saves money and inventory space, owing to a wide tube size range covered by a single machine Tube Size: 1½" - 7" (38.1 - 177.8 mm) OD

Effective cleaning of Tube Inner dia results into longer life and better performance of the vessels and Equipments. Tube cleaning brushes are used for soft , light scales inside the tubes. Bristles are made out of Nylon, steel and Stainless steel wires, as per customer requirements. Can be easily connect and disconnected thru threaded coupling. Available From 3/8” To 4” OD Tubes. TYPE : Condenser Brushes, Turk Head Brushes And Double Spiral Brushes, Etc.

Condenser Tube Cleaner Kit is Pneumatic operated system, designed to clean straight tubes in Heat Exchangers, condensers, coolers, chillers etc. These equipment contain many small diameter tubes which vary from 3/8" to 1.1/4" in diameter and six to twenty feet or even more in length. Consists of Portable Pneumatic Drive, Water Flushing Attachment, Set Of Hollow Shafts and Couplings, Cleaning Heads Like Drill, Cutter and Brush along with air and Water Hoses, all supplied in suitable steel carrying case. The suitable cleaning head according to the tube ID, is connected thru thread in to the hollow shafts , which is again connected to the Pneumatic drive, and inserted into the tube. Number of shafts are connected thru couplings to increase the length , to cover the entire length of the tube, to be cleaned. A water flushing system is also attached to the drive to flush out the loose deposits out of the tube as well to keep the tool head cool. The Pneumatic drive runs at a speed of about 700 RPM , along with the water flow, and the tool head breaks the scale, while the water loosens the deposits. Very Handy and user friendly, this equipment is very useful to those Industries, where periodical cleaning of tubes are mandatory.

Tool Heads is fitted to the Flexible shaft to remove scale and hard deposits from inside the tubes of Processing Equipment. Available in Fixed type with Three and Spring type with 15 Sharp revolving Cutters, it chip the scale at high speed and the resultant centrifugal force. All parts are manufactured from special Alloy steel and heat treated for longer life. For Medium Size Straight Tubes: * PAD Type Arrowhead Drill For Opening Blocked Tubes * PBT Type Boring Tool For Cleaning Semi blocked * PSL Type Spring Loaded For Hard And Obstinate Scale * PDH Type Double Head For Hard And Medium Scale * PAD/UJ Type Drill Head With Universal Joint For Thick Scale * PPA Type Pivoted Arm For Uneven Hard Scale * PSF Type Swing Frame For All Types Of Scale * PSH Type Single Head For Hard And Medium Scale * WBA Type Cup Shaped For Scouring Of Thin Hard Scale * PTH Type Turk's Head For Scouring After Descaling * PDS Type Double Spiral For Scouring Carbon Scale * PGP Type General Purpose For Debarring Polishing Etc.

It is a Shaft consist of Inner Core ,Outer casing Motor Coupling and Hand piece. It is designed to penetrate in to the tube inner dia, flexibly even into the bend tubes, without damaging the inner surface of the tube, and capable of transmitting rotary power from the Power unit to the tool head or brush. INNER WIRE CORE is flexible shaft's most important working element. It is designed and constructed to meet power drive operating conditions that include torque, speed, length and minimum bend radius. At the centre of the core is a single wire around which successive multi-stranded layers of wires are wrapped. Each layer is wound in the opposite direction and at right angles to the layer directly beneath it. The direction in which the wire on the outer most layer is wound determines the direction in which the shaft is designed to rotate. OUTER CASTING made of galvanized steel strip and is internally reinforced with antifriction lining to support the wire core and resist the torque. Outer casing does not rotate but protect the inner core and the tube inner dia. HANDPIECE is attached to one end of the shaft, either detachable or fixed type, with threaded spindle to connect tool heads or brushes. MOTOR COUPLING is fitted to the other end of the shaft, either threaded type or shear pin type, connected to the main power unit. Available in 25mm(1”) , 32mm(1.1/4”) and 36mm(1.3/8”) OD with 12mm(1/2”),16mm (5/16”) and 19 mm(3/4”) inner core respectively, with various length of 6 to 22 mtrs. Long. Longer length is also available on request.

Periodic cleaning of Tube Inner dia in Processing Equipment like BOILERS, Air Heaters , Evaporators and Sugar Refining vessels is very essential for its better performance and longer life. Our Flexible Shaft Machines are designed to meet customer’s expectation, with rugged construction, simple to operate, minimum maintenance and trouble free service. It is a self-contained portable unit, fitted with lifting or carrying handle. It consists of a TEFC, continuously rated, squirrel cage, 440 volts, 3 phase, 50 C/S, AC electric motor. Standard machines are available with 3, 5 & 7.5 HP and Free speed of 2880 or 1440 RPM. It is controlled by a push button starter, with features like single phase protection, overload and under voltage protection. In addition it is also ambient temperature compensated. Each machine is fully wired, carefully tested and is supplied with a 20 feet long power cable .

Flaring of projected tube ends, after Expansion ensures better grip of the tube with the Tube sheet. It can be used either manually or with Pneumatic Chipping Hammer. Made out of Special Alloy and heat treated , to withstand the impact load, while using. Handle portion is knurled for better grip. Available For Any Tube Size Between ½” To 1.1/2” OD Tubes

Inserting the tubes in to the Tube sheet and Baffle plates is one of the very important activity , in manufacturing of Heat Exchangers, Condensers , Chiller etc., during which the tube ends often get damaged, result into the rejection of complete tubes , most of the time, particularly in Non-Ferrous tubes. Our Tube Guides are designed to protect the tube ends and simplifying the tube insertion process. The Conical shape of the nose allows the Tube end to self align it to the holes in the baffles plates and the tube sheet. Made out of Aluminium nose with Nylon bristle tails, which hold the Guide into the tube ID ., firmly, while insertion. It can be re-used. Sizes Available For ½” To 2.1/2” OD Tubes.

Trimming of Tube ends in Condensers, Chillers, Heat Exchangers is one of the very important application, which needs proper tool. We have made it very simple with the SAPSONS tube end facers, which is available with Square , Flat and Round tool bits. It has the Hexagonal shank, to conveniently use with both Pneumatic and Electric power tools. Except in 3/8” OD tubes, One tool can be used for various thickness of tubes of same OD, by simply changing the Pilot Bush. Applications : * Tube End Facing / Trimming * Weld Trimming * Tube Flushing Sizes Available : 3/8” ( 9.5 mm ) to 2.1/2” ( 63.5 mm )

Trolley : wheeled cart or trolley used to store, organize, and transport tools and equipment related to tubes or pipes. These are commonly used in industries like plumbing, HVAC, mechanical maintenance, and power plants.