'19 mm'

Air Hammers – High-Performance Pneumatic Tools for Heavy-Duty Applications Air Hammers, also known as pneumatic hammers, are powerful tools designed for high-impact tasks such as cutting, chipping, carving, or breaking hard materials like metal, stone, or concrete. Powered by compressed air, these tools offer superior performance, precision, and control—making them ideal for automotive repair, metal fabrication, construction, and demolition work.

It is a Shaft consist of Inner Core ,Outer casing Motor Coupling and Hand piece. It is designed to penetrate in to the tube inner dia, flexibly even into the bend tubes, without damaging the inner surface of the tube, and capable of transmitting rotary power from the Power unit to the tool head or brush. INNER WIRE CORE is flexible shaft's most important working element. It is designed and constructed to meet power drive operating conditions that include torque, speed, length and minimum bend radius. At the centre of the core is a single wire around which successive multi-stranded layers of wires are wrapped. Each layer is wound in the opposite direction and at right angles to the layer directly beneath it. The direction in which the wire on the outer most layer is wound determines the direction in which the shaft is designed to rotate. OUTER CASTING made of galvanized steel strip and is internally reinforced with antifriction lining to support the wire core and resist the torque. Outer casing does not rotate but protect the inner core and the tube inner dia. HANDPIECE is attached to one end of the shaft, either detachable or fixed type, with threaded spindle to connect tool heads or brushes. MOTOR COUPLING is fitted to the other end of the shaft, either threaded type or shear pin type, connected to the main power unit. Available in 25mm(1”) , 32mm(1.1/4”) and 36mm(1.3/8”) OD with 12mm(1/2”),16mm (5/16”) and 19 mm(3/4”) inner core respectively, with various length of 6 to 22 mtrs. Long. Longer length is also available on request.

1300 Series is the long reach expander used for higher thickness tube sheets, where expansion lengths is longer. Used for oil Coolers , Radiators & other equipment, where small diameter tubes are used. Suitable for Tube sizes ¼” to 3/8” OD. For Tubes of I.D. : 0.231" (5.8mm) to 0.331" (8.4mm). Available in Roller Lengths of 3/4" (19.05mm) and 1.14" (31.75mm) for Tube Expansion Length 3/4" (19.05mm) to 3.1/2" (88.9mm)

900 Series used in oil Coolers, radiators and other equipment of small diameter tubes. Suitable for Tube sizes ¼” to 3/8” OD. For Tubes of I.D. : 0.152" (3.8mm) to 0.331" (8.4mm). Available in Roller Lengths of 3/4" (19.05mm) and 1.14" (31.75mm) for Tube Expansion Length 1.1/4" (6.35mm) to 1.14" (31.75mm).

SAPSONS Ratchet Handles that have mechanism to suit both right- and left-hand operation. Manufactured with both 'V' teeth and square teeth, and available in open and closed body design, these Ratchet handles are designed to withstand high torque. It is available in 1/4″ (6.35 mm), 3/8″ (9.5 mm), 1/2″ (12.7 mm), 3/4″ (19 mm) and 1″ (25.4 mm) square drives of both Male and Female Drive. We also make Special and Bigger sizes as per our customer requirements for both Female Square and Hex Drive.” Female Hex drive can be supplied up to 75 mm (3” ) A/F… Also available in any special shape, (Triangle ,Bi-Hex, torx etc.. ) to meet our customer requirement.

The Clean cut solution to removing frozen nuts. Hydraulic Nut Splitter is very useful tool for Processing Industries like Pharmaceuticals, Chemical plants, Fertilizers etc, where the atmosphere is corrosive or Industries which located near Sea-shore. In both the cases, the Fasteners often get corroded, and during routine maintenance or preventive maintenance, it is very difficult to open the Nuts, by manually or thru impact applications. SAPSONS Nut Splitters offer end to end solution of cutting frozen nuts, in such situation. Our Nut Splitter Tool is effectively used for removing heavily corroded, seized nuts quickly, quietly and safely without damaging the bolt and stud threads. Sapsons Nut-Splitter now you can easily remove heavily corroded, seized nuts quickly, quietly and safely. Fast : To remove a 90 mm nut with a torch or hammer and chisel might take upto 30 minutes. But yoy only need 20-30 seconds with our Sapsons Nut Splitter. Safe: No hammer, no impact. Operator has hands off during operation. No sparks, No Flames, No risk to volatile environments. Sapsons Nut Splitter cuts smoothly, with no flying fragments. Quiet : All you will hear is the hiss of the hydraulic pump and a reassuring " snap" when the nut is split. Precise: You can easily calibrate the cutting chisel so only the nut is split, with no damage to the bolt or stud threads. Versatile : SAPSONS NUT SPLITTER cuts through even the hardest nuts, including ASTMA194 Brinell hardness 248-352. And each model of SAPSONS NUT SPLITTER can be used for a wide range of metric or inch nut sizes. It Saves You Money : Nut removal takes less time, so downtime is reduced. And with SAPSONS NUT SPLITTER, you can avoid costly damage to bolts, studs and surrounding equipment.

SAPSONS make soft-faced hammers and mallets are designed to transmit the whole force of blow safely and effectively. Also available, raw-hide hammers as per customer requirement. Under Nylon Tip Hammers / Raw hide hammers, heading: Salient Features * Designed to avoid bouncing blows * Comes with a special filling insert in the hammer head, which allows a significantly higher striking effect as compared to standard recoilless hammers * Special filling seamlessly absorbs the counter pulse triggered by the hammer head * Universal use for assembly and service work * Can be supplied as hammers or mallets with polyamide or raw-hide tips as per specific customer requirements

SPECIFICATIONS : POWER: 4.1 KW SPEED: 3600 RPM OVERALL WEIGHT: APPROX. 130 KG POWER SOURCE:PETROL DRIVEN 4 STROKE ENGINE (STARTS WITH PETROL & RUNS WITH KEROSENE) BLADE SIZE: VARIES WITH EACH RAIL SECTION APPLICATION : To Operate This Machine, Minimum Two Operators Required. For Trimming The Rail At Site, Operated Thru Petrol Start And Driven By Kerosene Engine. Supplied With Engine, But Without Cutting Wheel.

A belt sander is a power tool that uses a loop of sandpaper on rotating drums to quickly smooth or shape wood, metal, or other surfaces. It comes in handheld or stationary types and is commonly used in woodworking and DIY projects. It's fast and powerful, ideal for large, flat areas, but requires careful handling for best results and safety.