'2 4 minutes'

1200 Series is the long reach expanders used for higher thickness tube sheets, where expansion lengths is longer. Used for manufacturing of Heat Exchanger & Condensers, Suitable for Tube size: 1/2" to 1.1/2” OD. For Tubes of I.D. : 0.334" (8.4mm) to 1.43" (36.3mm). Available in Roller Lengths of 1.1/2" (38.1mm) and 2.1/4" (57.1mm) & Range of Models to cover Tube Expansion Length 1.1/2" (38.1mm) to 12.3/4" (323.6mm).

8012 Series is the adjustable type tube expanders with thrust bearing collar, to be used in normal and heavy thickness tubes of Boilers, Air Heaters, Refinery Tubes, It can be used for expanding thick tube sheets of up to 8” standard expanders available for 1.3/4” to 5” OD Tubes. Available for bigger tube sizes on request. For tubes of I.D. : 1.420" (36.1mm) to 2.902" (73.7mm). Available in Roller Lengths of 2.1/4" (57.1mm) and 2.902" (73.7mm) To cover Tube Expansion Length 1/2" (12.7mm) to 4" (101.6mm).

The Clean cut solution to removing frozen nuts. Hydraulic Nut Splitter is very useful tool for Processing Industries like Pharmaceuticals, Chemical plants, Fertilizers etc, where the atmosphere is corrosive or Industries which located near Sea-shore. In both the cases, the Fasteners often get corroded, and during routine maintenance or preventive maintenance, it is very difficult to open the Nuts, by manually or thru impact applications. SAPSONS Nut Splitters offer end to end solution of cutting frozen nuts, in such situation. Our Nut Splitter Tool is effectively used for removing heavily corroded, seized nuts quickly, quietly and safely without damaging the bolt and stud threads. Sapsons Nut-Splitter now you can easily remove heavily corroded, seized nuts quickly, quietly and safely. Fast : To remove a 90 mm nut with a torch or hammer and chisel might take upto 30 minutes. But yoy only need 20-30 seconds with our Sapsons Nut Splitter. Safe: No hammer, no impact. Operator has hands off during operation. No sparks, No Flames, No risk to volatile environments. Sapsons Nut Splitter cuts smoothly, with no flying fragments. Quiet : All you will hear is the hiss of the hydraulic pump and a reassuring " snap" when the nut is split. Precise: You can easily calibrate the cutting chisel so only the nut is split, with no damage to the bolt or stud threads. Versatile : SAPSONS NUT SPLITTER cuts through even the hardest nuts, including ASTMA194 Brinell hardness 248-352. And each model of SAPSONS NUT SPLITTER can be used for a wide range of metric or inch nut sizes. It Saves You Money : Nut removal takes less time, so downtime is reduced. And with SAPSONS NUT SPLITTER, you can avoid costly damage to bolts, studs and surrounding equipment.

SPECIFICATIONS: POWER: 3 HP DRILLING TIME : 2-4 MINUTES DRILLING CAPACITY : UPTO 35 MM OVERALL WEIGHT: APPROX. 60 KG POWER SOURCE: PETROL START & KEROSEN DRIVEN ENGINE APPLICATION : Onsite Drilling Of Rail , Operated Thru Petrol START And Kerosene Driven Engine. Supplied With Petrol Driven Engine, But Without Drill.

Sliding T - Handle is used for driving of manually operated sockets. It has a large leverage handle which allows application of force comfortably. The final tightening can be done with both hands. The sliding T-head is provided with a ball to arrest movement of handle at any desired position. Available in 1/4", 3/8", 1/2", 3/4", 1" and 1.1/2 " Square Drives.

Under Hand Crimping Tools, put text : PL series: Fitted with jaws, Sapsons hand-operated plier-type PL series crimping tools are designed to have better metal-to-metal contact between wires and non-insulated cable terminal ends. Size: 0.5 sq. mm to 16.0 sq. mm GD series: Sapsons GD series bench-type hand crimping tool is suitable for bench-mounted crimping and production line applications. Size: 10 sq. mm to 185 sq. mm GP series: Sapsons GP series mechanical gear-powered hand-operated crimping tool is a multi-stroke tool with ratchet & pin lock, and a rapid motion with maximum handle opening of 90°. This lightweight yet sturdy tool comes with interchangeable hex-type dies and is incredibly handy for carrying out tasks in a remote setting. Size: 25 sq. mm to 400 sq. mm

Air Drills: An air drill (also called a pneumatic drill) is a powerful drilling tool powered by compressed air instead of electricity. It’s commonly used in industrial, automotive, and manufacturing settings where durability and continuous use are important. Sizes: Available with 1/4', 3/8' and 1/2' drill chuck

Impact Drivers : An impact driver is a power tool designed for driving screws and bolts with high torque by delivering rapid, strong rotational impacts. Unlike regular drills, impact drivers combine rotational force with quick bursts of concussive force (impacts) to loosen or drive fasteners more efficiently. Sizes: 1/4' hexagonal drive with maximum torque capacity of approximately 270 Nm.

‘HJ’ Series : Hydraulic Crimping Tools are made out of Solid Special Alloy Steel, where weight is not an issue to the customer, and it is mainly used in manufacturing plants, with Crane facility. These tools are Economy model but heavy in design. HJ Series Hydraulic Crimping Tools are available for crimping Copper and Aluminum Cable terminal ends up to 400 Sq.mm with Ring or Hex dies. Construction and Working: The Crimping Jack and Hydraulic Pump are connected with 2 Mtrs. long Hydraulic Hose pipe and the Hydraulic Hand pump is designed to develop Pressure of up to 250 Kg/ Sq.mm. The mechanism within the pump controls the pressure developed, while crimping and safety valve prevents overloading.