'700 rpm'

Condenser Tube Cleaner Kit is Pneumatic operated system, designed to clean straight tubes in Heat Exchangers, condensers, coolers, chillers etc. These equipment contain many small diameter tubes which vary from 3/8" to 1.1/4" in diameter and six to twenty feet or even more in length. Consists of Portable Pneumatic Drive, Water Flushing Attachment, Set Of Hollow Shafts and Couplings, Cleaning Heads Like Drill, Cutter and Brush along with air and Water Hoses, all supplied in suitable steel carrying case. The suitable cleaning head according to the tube ID, is connected thru thread in to the hollow shafts , which is again connected to the Pneumatic drive, and inserted into the tube. Number of shafts are connected thru couplings to increase the length , to cover the entire length of the tube, to be cleaned. A water flushing system is also attached to the drive to flush out the loose deposits out of the tube as well to keep the tool head cool. The Pneumatic drive runs at a speed of about 700 RPM , along with the water flow, and the tool head breaks the scale, while the water loosens the deposits. Very Handy and user friendly, this equipment is very useful to those Industries, where periodical cleaning of tubes are mandatory.

FEATURES & APPLICATIONS : • Used to cut conductors up to 40 MM DIA • Operation similar to a hydraulic jack • Knob-handle is turned to enable lineman to operate pump handle • When cut is completed, knob is turned in opposite direction to allow cutting head to open • Epoxiglass pole, handle and hydraulic hose have been tested upto 700 bar working pressure. • Hydraulic oil grade 68 is used in Hand pump. • Hose has a minimum burst strength of 15,000 PSI • Features include jaws designed to cut without flattening conductor. • Jaws are made out of special alloy steel for long and trouble free application • Well balanced, requiring minimum effort to cut large conductors.

MH Series Electric Power Operated Hydraulic Crimping tools are available with 230 V as well as 110 V Single Phase power supply. The MH Series Hydraulic Crimping Tools are easy to carry and have compact power pack fitted with lifting handle. The MH Series Hydraulic Crimping Tools are supplied with all Aluminum body Motor for less weight and easy portability. Supplied with hand held slim design light weight crimping head, hexagonal dies, and suitable 2 meters long hydraulic hose. Electric Pumps are designed to develop Max. working Pressure up to 700 Bar. The crimping Head is Slim in design and made from Solid Special Alloy Steel to withstand the pressure developed while crimping. Available Models: * SAP-MH-400 – Capacity: 50.0 To 400.0 Sq. Mm (Supplied With Sets Of 9 Sizes Of Dies) * SAP-MH-630 – Capacity: 240.0 To 630.0 Sq. Mm (Supplied With Sets Of 5 Sizes Of Dies) * SAP-MH-1000 – Capacity: 500.0 TO 1000.0 Sq. Mm (Supplied With Sets Of 4 Sizes Of Dies) * SAP-MH-1200 – Capacity: 500.0 To 1200.0 Sq. Mm (Supplied With Sets Of 5 Sizes Of Dies) * Special Model Can Be Supplied With Additional Dies, As Per Customer’s Need. * Extra Long Hose Can Be Supplied With Tool On Request, At Extra Cost. Technical Specifications: Power Supply: 230 Volts Or 110 Volts Single Phase Tank Capacity: 10 Liters Max Working Pressure: 700 Kg/Sq.Cm Motor: 1 HP Pump: 2 LPM For special applications, with high power crimping, we have our HDX and HDZ series Crimping heads, which can be used with both Hand pump as well as Electric pumps, developing up to Max.Working pressure of 700 Bar.

SAPSONS ‘HD’ Series Hydraulic Crimping Tools is designed for crimping with Ring or Hex dies to crimp Copper / Aluminium Cable terminal ends/ Ferrules upto 1200 Sq. mm, powered by Heavy duty powerful Hand Pump. The Crimping Head and Hydraulic Hand Pump is connected with 2 Mtr. long Hydraulic Hose pipe and the Hydraulic Hand pump is designed to develop Pressure from 300 to 700 Bar. The crimping Head is Slim in design and made from Solid Special Alloy Steel to withstand the pressure developed while crimping. The mechanism within the pump controls the pressure developed, while crimping and safety valve prevents overloading. This Slim type Hand held Hydraulic crimping head is suitable for Heavy duty crimping and can be easily used inside the panels, very confined areas, critical positions and very critical applications. Available Models: * SAP-HD-400 – Capacity: 50.0 To 400.0 Sq. Mm (Supplied With Sets Of 9 Sizes Of Dies) * SAP-HD-630 – Capacity: 240.0 To 630.0 Sq. Mm (Supplied With Sets Of 5 Sizes Of Dies) * SAP-HD-1000 – Capacity: 500.0 To 1000.0 Sq. Mm (Supplied With Sets Of 4 Sizes Of Dies) * SAP-HD-1200 – Capacity: 500.0 To 1200.0 Sq. Mm (Supplied With Sets Of 5 Sizes Of Dies) * Special Model Can Be Supplied With Additional Dies, As Per Customer’s Need. * Extra Long Hose Can Be Supplied With Tool On Request, At Extra Cost.

Periodic cleaning of Tube Inner dia in Processing Equipment like BOILERS, Air Heaters , Evaporators and Sugar Refining vessels is very essential for its better performance and longer life. Our Flexible Shaft Machines are designed to meet customer’s expectation, with rugged construction, simple to operate, minimum maintenance and trouble free service. It is a self-contained portable unit, fitted with lifting or carrying handle. It consists of a TEFC, continuously rated, squirrel cage, 440 volts, 3 phase, 50 C/S, AC electric motor. Standard machines are available with 3, 5 & 7.5 HP and Free speed of 2880 or 1440 RPM. It is controlled by a push button starter, with features like single phase protection, overload and under voltage protection. In addition it is also ambient temperature compensated. Each machine is fully wired, carefully tested and is supplied with a 20 feet long power cable .

SAPSONS hydraulic hand pumps are suitable for various applications, like lifting, pressing, crimping ,jacking, and all other general applications. SAPSONS Heavy duty Hydraulic Hand Pumps are available up to 700 bar max. working pressure both in Single & Two Speed. Types: 1. Portable Hand Pumps– Single And Two Speed Compact Hydraulic Pumps, Very Useful Where Performance With Portability Is Preferred. 2. Heavy Duty Hand Pumps – Two Speed Pumps –With Auto Change Over From High Discharge At Low Pressure To Low Discharge At High Pressure. Once The Equipment Reaches The Load ,The Pump Automatically Change Over To High Pressure. 3. High Flow Hydraulic Hand Pumps – Heavy Duty Hand Pumps With Bigger Oil Capacity , Suitable For Double Acting Cylinders And Other Equipment. Specialities: * Easy, Effortless To Handle * Corrosion Resistant * Robust Construction * Reasonable Price.

Torque wrench is one of the very important tool, which is basically precision instrument, on which the quality of our job/ product depends. SAPSONS torque wrenches are manufactured , keeping this basic requirement in mind, and we take special care and precautions, from manufacturing to final testing and acceptance of the same, to ensure that there is no compromise to its quality and reliability. SAPSONS Adjustable / Preset click type Torque Wrenches are compact in design. Critical parts are made out of forged steel for long life and calibrated to an accuracy of + 3%. Available from 2.5 to 2700 NM Torque Capacity covered in 12 models with built in Ratchet Mechanism and Non - Ratchet Mechanism. Available in three different types as follows , depending upon the application, all supplied with + 3% accuracy : 1. Adjustable Click type torque wrench without Ratchet mechanism - where only final tightening is done with Torque wrench. 2. Adjustable Click type torque wrench with in-built Ratchet mechanism - where from initial to final tightening is done with Torque wrench, and for high productivity. 3. Fixed type torque wrench with or without Ratchet mechanism - where only pre-set torque is applied, repeatedly. TORQUE WRENCHES CAN BE SELECTED BASED ON THE REQUIRED TORQUE TO BE APPLIED, FROM OUR BELOW CHART... APPLICATIONS : Power Plants, Refineries, Petrochemicals, Fertilizers, Heavy Engineering Industries, Shipyards and Ship Building, Aeronautics and Automobiles. Features of 'SAPSONS' Torque Wrenches: * Sturdy And Robust Design * Guaranteed Accuracy Of ± 3% * Compact Design Facilitate Usage In Confined Areas. * Ensures Correct Torque By Click Sound, Vision And Operator Feeling * Calibrated By Electronic Calibrators To Close Tolerance, Which Are Certified By NPL. * very Torque Wrench Is Supplied With The Calibration Certificate.

SPECIFICATIONS : POWER: 4.1 KW SPEED: 3600 RPM OVERALL WEIGHT: APPROX. 130 KG POWER SOURCE:PETROL DRIVEN 4 STROKE ENGINE (STARTS WITH PETROL & RUNS WITH KEROSENE) BLADE SIZE: VARIES WITH EACH RAIL SECTION APPLICATION : To Operate This Machine, Minimum Two Operators Required. For Trimming The Rail At Site, Operated Thru Petrol Start And Driven By Kerosene Engine. Supplied With Engine, But Without Cutting Wheel.

SPECIFICATIONS : POWER: 4.1 KW SPEED: 3600 RPM OVERALL WEIGHT: APPROX. 32 KG POWER SOURCE: PETROL DRIVEN ENGINE TANK CAPACITY : 3.1 LTRS (PETROL) MAX.WHEEL SIZE: 16” ( 400 MM) APPLICATION : For Cutting The Rail At Site, Operated Thru Petrol Driven Engine. Supplied With Petrol Driven Engine, But Without Cutting Wheel.