SPECIFICATIONS : POWER: 4.1 KW SPEED: 3600 RPM OVERALL WEIGHT: APPROX. 32 KG POWER SOURCE: PETROL DRIVEN ENGINE TANK CAPACITY : 3.1 LTRS (PETROL) MAX.WHEEL SIZE: 16” ( 400 MM) APPLICATION : For Cutting The Rail At Site, Operated Thru Petrol Driven Engine. Supplied With Petrol Driven Engine, But Without Cutting Wheel.

SAPSONS HYDRAULIC CABLE SPIKING TOOL is specially designed to ensure the absence of voltage in low voltage and Medium voltage power cables before undertaking any electrical maintenance work. Human life is precious and by using our Cable spiking tool, the safety of the Electrical team is ensured. They can simply check the Power cable and eliminate accident. What is cable Spiking tools? Cable Spiking tool is one of the Safety tools used to protect the Electrical workers from any Electrical accident while carrying out cable repair, maintenance, jointing or end termination etc... The cable spiking chisel pierces the sheath of the cable, as well as its insulation, to reach the main conductor. If the cable is powered prior to cutting, an arcing fault is caused by breaking down the insulation. Why are spike tool used? Cable spiking tool is used to ensure that the power cable under maintenance is not live. Cables are spiked with the help of Cable spiking tool and confirm the circuit is not Live. It is one of the very important safety procedure universally followed and the Cables are preliminarily spiked before carrying out jointing or terminating of faulty 11kV/33kV cables. Our Cable spiking tool is intended to prove that any power cable under maintenance is previously disconnected, is dead before starting the work, when these cables are undergoing repair, diversion or maintenance. The design of SAPSONS cable spiking tool is robust and reliable which consist of a hand operated hydraulic pump connected by a hydraulic hose to the hydraulic cylinder. The Cable Spiking chisel which is made of special alloy steel and hardened is connected to the piston of the Hydraulic cylinder. When the cylinder is operated thru the Hydraulic hand pump, the chisel pierce into the cable to reach the conductor. The Cylinder is mounted on a Rectangular shaped tubular steel body which is placed on cable dia and locked with the lower base clamp by threaded steel rods on both the side. A separate earthing cable of approx. 6 mtrs. long crimped at one end with suitable lugs connected with the tool and the other end is having the earthing rod for grounding.

FEATURES & APPLICATIONS : • Used to cut conductors up to 40 MM DIA • Operation similar to a hydraulic jack • Knob-handle is turned to enable lineman to operate pump handle • When cut is completed, knob is turned in opposite direction to allow cutting head to open • Epoxiglass pole, handle and hydraulic hose have been tested upto 700 bar working pressure. • Hydraulic oil grade 68 is used in Hand pump. • Hose has a minimum burst strength of 15,000 PSI • Features include jaws designed to cut without flattening conductor. • Jaws are made out of special alloy steel for long and trouble free application • Well balanced, requiring minimum effort to cut large conductors.

Air Hammers – High-Performance Pneumatic Tools for Heavy-Duty Applications Air Hammers, also known as pneumatic hammers, are powerful tools designed for high-impact tasks such as cutting, chipping, carving, or breaking hard materials like metal, stone, or concrete. Powered by compressed air, these tools offer superior performance, precision, and control—making them ideal for automotive repair, metal fabrication, construction, and demolition work.

The Clean cut solution to removing frozen nuts. Hydraulic Nut Splitter is very useful tool for Processing Industries like Pharmaceuticals, Chemical plants, Fertilizers etc, where the atmosphere is corrosive or Industries which located near Sea-shore. In both the cases, the Fasteners often get corroded, and during routine maintenance or preventive maintenance, it is very difficult to open the Nuts, by manually or thru impact applications. SAPSONS Nut Splitters offer end to end solution of cutting frozen nuts, in such situation. Our Nut Splitter Tool is effectively used for removing heavily corroded, seized nuts quickly, quietly and safely without damaging the bolt and stud threads. Sapsons Nut-Splitter now you can easily remove heavily corroded, seized nuts quickly, quietly and safely. Fast : To remove a 90 mm nut with a torch or hammer and chisel might take upto 30 minutes. But yoy only need 20-30 seconds with our Sapsons Nut Splitter. Safe: No hammer, no impact. Operator has hands off during operation. No sparks, No Flames, No risk to volatile environments. Sapsons Nut Splitter cuts smoothly, with no flying fragments. Quiet : All you will hear is the hiss of the hydraulic pump and a reassuring " snap" when the nut is split. Precise: You can easily calibrate the cutting chisel so only the nut is split, with no damage to the bolt or stud threads. Versatile : SAPSONS NUT SPLITTER cuts through even the hardest nuts, including ASTMA194 Brinell hardness 248-352. And each model of SAPSONS NUT SPLITTER can be used for a wide range of metric or inch nut sizes. It Saves You Money : Nut removal takes less time, so downtime is reduced. And with SAPSONS NUT SPLITTER, you can avoid costly damage to bolts, studs and surrounding equipment.

Tube Sheet Hole Reamers SAPSONS High Speed Steel CRYO PROCESSED long fluted Machine Reamer to IS : 5445 having virtually parallel cutting edges with bevel level lead integral with taper shank, ideal for the smooth and accurate Reaming of clearance holes in Tube Sheets, Condenser and Heat Exchangers, Tube Sheet Reamers to meet "TEMA" specifications. SAPSONS High Speed Steel CRYO PROCESSED long fluted Machine Reamer to IS : 5445 having virtually parallel cutting edges with bevel level lead integral with taper shank, ideal for the smooth and accurate Reaming of clearance holes in Tube Sheets, Condensers and Heat Exchangers, Tube Sheet Reamers to meet "TEMA" specifications.

SPECIFICATIONS : POWER: 4.1 KW SPEED: 3600 RPM OVERALL WEIGHT: APPROX. 130 KG POWER SOURCE:PETROL DRIVEN 4 STROKE ENGINE (STARTS WITH PETROL & RUNS WITH KEROSENE) BLADE SIZE: VARIES WITH EACH RAIL SECTION APPLICATION : To Operate This Machine, Minimum Two Operators Required. For Trimming The Rail At Site, Operated Thru Petrol Start And Driven By Kerosene Engine. Supplied With Engine, But Without Cutting Wheel.