'each rail section'

SPECIFICATIONS : POWER: 4.1 KW SPEED: 3600 RPM OVERALL WEIGHT: APPROX. 130 KG POWER SOURCE:PETROL DRIVEN 4 STROKE ENGINE (STARTS WITH PETROL & RUNS WITH KEROSENE) BLADE SIZE: VARIES WITH EACH RAIL SECTION APPLICATION : To Operate This Machine, Minimum Two Operators Required. For Trimming The Rail At Site, Operated Thru Petrol Start And Driven By Kerosene Engine. Supplied With Engine, But Without Cutting Wheel.

SPECIFICATIONS: POWER: 3 HP DRILLING TIME : 2-4 MINUTES DRILLING CAPACITY : UPTO 35 MM OVERALL WEIGHT: APPROX. 60 KG POWER SOURCE: PETROL START & KEROSEN DRIVEN ENGINE APPLICATION : Onsite Drilling Of Rail , Operated Thru Petrol START And Kerosene Driven Engine. Supplied With Petrol Driven Engine, But Without Drill.

SPECIFICATIONS : POWER: 4.1 KW SPEED: 3600 RPM OVERALL WEIGHT: APPROX. 32 KG POWER SOURCE: PETROL DRIVEN ENGINE TANK CAPACITY : 3.1 LTRS (PETROL) MAX.WHEEL SIZE: 16” ( 400 MM) APPLICATION : For Cutting The Rail At Site, Operated Thru Petrol Driven Engine. Supplied With Petrol Driven Engine, But Without Cutting Wheel.

Electric Rail Profile Grinding Machine : An Electric Rail Profile Grinding Machine is a specialized tool used in railway maintenance to restore the original profile and smoothness of steel rails. These machines are essential for maintaining track safety, extending rail life, and reducing noise and wear.

SAPSONS HYDRAULIC CABLE SPIKING TOOL is specially designed to ensure the absence of voltage in low voltage and Medium voltage power cables before undertaking any electrical maintenance work. Human life is precious and by using our Cable spiking tool, the safety of the Electrical team is ensured. They can simply check the Power cable and eliminate accident. What is cable Spiking tools? Cable Spiking tool is one of the Safety tools used to protect the Electrical workers from any Electrical accident while carrying out cable repair, maintenance, jointing or end termination etc... The cable spiking chisel pierces the sheath of the cable, as well as its insulation, to reach the main conductor. If the cable is powered prior to cutting, an arcing fault is caused by breaking down the insulation. Why are spike tool used? Cable spiking tool is used to ensure that the power cable under maintenance is not live. Cables are spiked with the help of Cable spiking tool and confirm the circuit is not Live. It is one of the very important safety procedure universally followed and the Cables are preliminarily spiked before carrying out jointing or terminating of faulty 11kV/33kV cables. Our Cable spiking tool is intended to prove that any power cable under maintenance is previously disconnected, is dead before starting the work, when these cables are undergoing repair, diversion or maintenance. The design of SAPSONS cable spiking tool is robust and reliable which consist of a hand operated hydraulic pump connected by a hydraulic hose to the hydraulic cylinder. The Cable Spiking chisel which is made of special alloy steel and hardened is connected to the piston of the Hydraulic cylinder. When the cylinder is operated thru the Hydraulic hand pump, the chisel pierce into the cable to reach the conductor. The Cylinder is mounted on a Rectangular shaped tubular steel body which is placed on cable dia and locked with the lower base clamp by threaded steel rods on both the side. A separate earthing cable of approx. 6 mtrs. long crimped at one end with suitable lugs connected with the tool and the other end is having the earthing rod for grounding.

Sanders :Sanders tools are power tools used for smoothing or shaping surfaces, typically wood, metal, or plastic, by abrasion with sandpaper. They come in various types, each suited for specific tasks in carpentry, woodworking, automotive repair, metalworking, and even home improvement.

Ratchet Wrench : A ratchet wrench is a hand tool used to tighten or loosen nuts and bolts efficiently without having to lift and reposition the tool after each turn. It features a ratcheting mechanism that allows the handle to move back and forth while the socket stays engaged with the fastener. Sizes: 3/8' to 1/2' square drive with maximum torque capacity of approximately 120 Nm.

It is a Shaft consist of Inner Core ,Outer casing Motor Coupling and Hand piece. It is designed to penetrate in to the tube inner dia, flexibly even into the bend tubes, without damaging the inner surface of the tube, and capable of transmitting rotary power from the Power unit to the tool head or brush. INNER WIRE CORE is flexible shaft's most important working element. It is designed and constructed to meet power drive operating conditions that include torque, speed, length and minimum bend radius. At the centre of the core is a single wire around which successive multi-stranded layers of wires are wrapped. Each layer is wound in the opposite direction and at right angles to the layer directly beneath it. The direction in which the wire on the outer most layer is wound determines the direction in which the shaft is designed to rotate. OUTER CASTING made of galvanized steel strip and is internally reinforced with antifriction lining to support the wire core and resist the torque. Outer casing does not rotate but protect the inner core and the tube inner dia. HANDPIECE is attached to one end of the shaft, either detachable or fixed type, with threaded spindle to connect tool heads or brushes. MOTOR COUPLING is fitted to the other end of the shaft, either threaded type or shear pin type, connected to the main power unit. Available in 25mm(1”) , 32mm(1.1/4”) and 36mm(1.3/8”) OD with 12mm(1/2”),16mm (5/16”) and 19 mm(3/4”) inner core respectively, with various length of 6 to 22 mtrs. Long. Longer length is also available on request.

Periodic cleaning of Tube Inner dia in Processing Equipment like BOILERS, Air Heaters , Evaporators and Sugar Refining vessels is very essential for its better performance and longer life. Our Flexible Shaft Machines are designed to meet customer’s expectation, with rugged construction, simple to operate, minimum maintenance and trouble free service. It is a self-contained portable unit, fitted with lifting or carrying handle. It consists of a TEFC, continuously rated, squirrel cage, 440 volts, 3 phase, 50 C/S, AC electric motor. Standard machines are available with 3, 5 & 7.5 HP and Free speed of 2880 or 1440 RPM. It is controlled by a push button starter, with features like single phase protection, overload and under voltage protection. In addition it is also ambient temperature compensated. Each machine is fully wired, carefully tested and is supplied with a 20 feet long power cable .