'effective cleaning'

Effective cleaning of Tube Inner dia results into longer life and better performance of the vessels and Equipments. Tube cleaning brushes are used for soft , light scales inside the tubes. Bristles are made out of Nylon, steel and Stainless steel wires, as per customer requirements. Can be easily connect and disconnected thru threaded coupling. Available From 3/8” To 4” OD Tubes. TYPE : Condenser Brushes, Turk Head Brushes And Double Spiral Brushes, Etc.

Condenser Tube Cleaner Kit is Pneumatic operated system, designed to clean straight tubes in Heat Exchangers, condensers, coolers, chillers etc. These equipment contain many small diameter tubes which vary from 3/8" to 1.1/4" in diameter and six to twenty feet or even more in length. Consists of Portable Pneumatic Drive, Water Flushing Attachment, Set Of Hollow Shafts and Couplings, Cleaning Heads Like Drill, Cutter and Brush along with air and Water Hoses, all supplied in suitable steel carrying case. The suitable cleaning head according to the tube ID, is connected thru thread in to the hollow shafts , which is again connected to the Pneumatic drive, and inserted into the tube. Number of shafts are connected thru couplings to increase the length , to cover the entire length of the tube, to be cleaned. A water flushing system is also attached to the drive to flush out the loose deposits out of the tube as well to keep the tool head cool. The Pneumatic drive runs at a speed of about 700 RPM , along with the water flow, and the tool head breaks the scale, while the water loosens the deposits. Very Handy and user friendly, this equipment is very useful to those Industries, where periodical cleaning of tubes are mandatory.

Tool Heads is fitted to the Flexible shaft to remove scale and hard deposits from inside the tubes of Processing Equipment. Available in Fixed type with Three and Spring type with 15 Sharp revolving Cutters, it chip the scale at high speed and the resultant centrifugal force. All parts are manufactured from special Alloy steel and heat treated for longer life. For Medium Size Straight Tubes: * PAD Type Arrowhead Drill For Opening Blocked Tubes * PBT Type Boring Tool For Cleaning Semi blocked * PSL Type Spring Loaded For Hard And Obstinate Scale * PDH Type Double Head For Hard And Medium Scale * PAD/UJ Type Drill Head With Universal Joint For Thick Scale * PPA Type Pivoted Arm For Uneven Hard Scale * PSF Type Swing Frame For All Types Of Scale * PSH Type Single Head For Hard And Medium Scale * WBA Type Cup Shaped For Scouring Of Thin Hard Scale * PTH Type Turk's Head For Scouring After Descaling * PDS Type Double Spiral For Scouring Carbon Scale * PGP Type General Purpose For Debarring Polishing Etc.

Periodic cleaning of Tube Inner dia in Processing Equipment like BOILERS, Air Heaters , Evaporators and Sugar Refining vessels is very essential for its better performance and longer life. Our Flexible Shaft Machines are designed to meet customer’s expectation, with rugged construction, simple to operate, minimum maintenance and trouble free service. It is a self-contained portable unit, fitted with lifting or carrying handle. It consists of a TEFC, continuously rated, squirrel cage, 440 volts, 3 phase, 50 C/S, AC electric motor. Standard machines are available with 3, 5 & 7.5 HP and Free speed of 2880 or 1440 RPM. It is controlled by a push button starter, with features like single phase protection, overload and under voltage protection. In addition it is also ambient temperature compensated. Each machine is fully wired, carefully tested and is supplied with a 20 feet long power cable .

Torque Multiplier is a tool, for applying higher torque with low efforts. SAPSONS Torque Multipliers are compact alloy steel, epicyclical gear units, designed for tightening and loosening of nuts and bolts by providing very high torque economically, is available up to Max. Torque capacity of 35000 Lb.ft. Torque Multiplier is interposed between a standard Torque Wrench and the Socket, and the reaction bar/bracket is allowed to rest against any convenient solid object. The operator then has effective leverage of Torque Wrench 5 times or 25 times or 125 times. The wrench being used in to the input side of the gear unit. All standard single stage gear units are having the multiplication ratio of 5:1. The gear units are compounded to give 25:1 or 125:1 ratio, provides the equivalent of 4 extra manpower to the user. Output Torque = Input Torque X Multiplication Factor. In limited work place, use of Torque Multiplier generates high Torque, with precision and ease. In many cases it eliminates dismantling of nearby equipment. Throughout the world thousands of Torque Multipliers are used everyday for maintenance job, Production and Servicing, where high torque is applied. FEATURES: * Various Models available ranging from 170 to 4845 Kgm. * Compact design, smooth in operation. * Models available with multiplication ratio of 5:1, 25:1 and 125:1. * Standard slide mount Reaction Bar and slotted bracket adopts readily to most applications. * Special reaction arms are available for difficult applications. BENEFITS: * Cover small bolting as well as the larger application because of wide range of available models. * Uniformity of bolting, minimum flange distortion and less likelihood of leaks. * Cuts down Manpower requirements, reduces opertor fatigue, as a result saves MONEY. * In high Torque applications, final torques are achieved with very low input torque. With higher multiplication ratio, very less operator fatigue. * No special reaction bars required for blind flanges, Heat Exchangers, channel covers etc. * Capable to provide reaction bar for any applications. ADVANTAGES: * One man can tighten or loosen the toughest nut or bolt with complete safety. * Compact efficient design provides greater ease and safety in handling and operating. * Designed to be used with standard tools, hand torque and air-driven non-impact type wrenches. * Planetary gears and all alloy steel construction assure minimum mechanical loss through distortion. * A standard sliding reaction bar meets practically all normal requirements.

The Clean cut solution to removing frozen nuts. Hydraulic Nut Splitter is very useful tool for Processing Industries like Pharmaceuticals, Chemical plants, Fertilizers etc, where the atmosphere is corrosive or Industries which located near Sea-shore. In both the cases, the Fasteners often get corroded, and during routine maintenance or preventive maintenance, it is very difficult to open the Nuts, by manually or thru impact applications. SAPSONS Nut Splitters offer end to end solution of cutting frozen nuts, in such situation. Our Nut Splitter Tool is effectively used for removing heavily corroded, seized nuts quickly, quietly and safely without damaging the bolt and stud threads. Sapsons Nut-Splitter now you can easily remove heavily corroded, seized nuts quickly, quietly and safely. Fast : To remove a 90 mm nut with a torch or hammer and chisel might take upto 30 minutes. But yoy only need 20-30 seconds with our Sapsons Nut Splitter. Safe: No hammer, no impact. Operator has hands off during operation. No sparks, No Flames, No risk to volatile environments. Sapsons Nut Splitter cuts smoothly, with no flying fragments. Quiet : All you will hear is the hiss of the hydraulic pump and a reassuring " snap" when the nut is split. Precise: You can easily calibrate the cutting chisel so only the nut is split, with no damage to the bolt or stud threads. Versatile : SAPSONS NUT SPLITTER cuts through even the hardest nuts, including ASTMA194 Brinell hardness 248-352. And each model of SAPSONS NUT SPLITTER can be used for a wide range of metric or inch nut sizes. It Saves You Money : Nut removal takes less time, so downtime is reduced. And with SAPSONS NUT SPLITTER, you can avoid costly damage to bolts, studs and surrounding equipment.

SAPSONS make soft-faced hammers and mallets are designed to transmit the whole force of blow safely and effectively. Also available, raw-hide hammers as per customer requirement. Under Nylon Tip Hammers / Raw hide hammers, heading: Salient Features * Designed to avoid bouncing blows * Comes with a special filling insert in the hammer head, which allows a significantly higher striking effect as compared to standard recoilless hammers * Special filling seamlessly absorbs the counter pulse triggered by the hammer head * Universal use for assembly and service work * Can be supplied as hammers or mallets with polyamide or raw-hide tips as per specific customer requirements

Spring Balancers - are most scientifically designed for suspending and balancing the object , at required height. Working on the principle of Coiled spring, it ensures constant tension throughout the entire cable travel, to ensure fatigueless operation. Manufactured from High grade Aluminium casting, it is compact in design and light in weight. With Forged swivel top hook for 360 deg. Rotation, it has built-in safety locking mechanism, to prevent any unforeseen accident, due to spring failure. Salient Features: - Specially designed to free the operator from the weight of hand tools, thereby reducing operator fatigue. - Allows easy handling, as the weight of the loaded balancers and pressure required for operation is counter balanced in the containerized (main) spring mechanism of the spring balancers itself. - Provides maximum impact resistance due to the rugged construction of spring balancer (as main housing and cover plate are manufactured from high tensile lightweight aluminium alloy. - Ensures maximum safety due to forged steel upper support hook and bottom suspension hook assemblies. - Good flexibility and fall safety as a result of cables made using standard flexible wire rope . - Unique, tapered cable drum design that matches the middle turns of spring balancers where the optimum torque build-up is constant; provides smooth and even cable tensions throughout the entire cable travel length. - Easily accessible external tension adjustment, using which required tension can be set through a hardened worm form gear system; no special tool required. - Swivel on top hook allows 360° rotation positioning the spring balancers for easiest cable flow; prolongs cable life. - Automatic Drum Lock arrangement to prevent the load from falling in case spring balancer lowers sharply. - Suspended tools can be easily engaged or disengaged using the manual drum lock, making changeover safe, simple and quick; reduces downtime. Applications : Portable Hand Tools, Welder Guns, Spray guns, Short Blast Guns, Drifting Attachments in mines and Quarries, Jute and synthetic bag closing machines, Gauges, Jigs and Fixtures, Pendant Station, Switch Button of Hoists, in case of de-oxidation, water washing of plating work with raising and lowering of work etc. Design : Overhead Spring Balancers are specially designed to free the operator from weight of the hand tools or any other object, which is handled by human, for hours, continuously. When properly balanced by adjusting spring tension, the tools become almost weightless in the hands of the operator and can be moved up and down with very little effort. Advantages: 1. Increases Productivity – Balancers Keep Poised For Action, Minimize Motions Required To Bring Tool From Rest To Work Positions. 2. Extends Tool Life - Balancers Eliminate Pick-Up And Lay Down Wear And Prevent Damage From Dropping. 3. Reduces Operator Fatigue – A Balancer Makes The Heaviest Tool Light As A Feather. Operator Effort Can Be Directed To Controlling The Tool Rather Than Supporting. 4. No Need Of Power – There Is No Need Of Electrical Or Mechanical Power. 5. Increases Safety – Balancers Keep Work Area Uncluttered To Reduce Chances Of Damages Of Accessories Or Accidental Start-Up Of Tools During Handling. 6. Effective Use Of Space – The Working Place Being Widely Utilized, And Also To Be Cleaned Up, The Production Is Smoothly Carried Out.