SAPSONS HYDRAULIC CABLE SPIKING TOOL is specially designed to ensure the absence of voltage in low voltage and Medium voltage power cables before undertaking any electrical maintenance work. Human life is precious and by using our Cable spiking tool, the safety of the Electrical team is ensured. They can simply check the Power cable and eliminate accident. What is cable Spiking tools? Cable Spiking tool is one of the Safety tools used to protect the Electrical workers from any Electrical accident while carrying out cable repair, maintenance, jointing or end termination etc... The cable spiking chisel pierces the sheath of the cable, as well as its insulation, to reach the main conductor. If the cable is powered prior to cutting, an arcing fault is caused by breaking down the insulation. Why are spike tool used? Cable spiking tool is used to ensure that the power cable under maintenance is not live. Cables are spiked with the help of Cable spiking tool and confirm the circuit is not Live. It is one of the very important safety procedure universally followed and the Cables are preliminarily spiked before carrying out jointing or terminating of faulty 11kV/33kV cables. Our Cable spiking tool is intended to prove that any power cable under maintenance is previously disconnected, is dead before starting the work, when these cables are undergoing repair, diversion or maintenance. The design of SAPSONS cable spiking tool is robust and reliable which consist of a hand operated hydraulic pump connected by a hydraulic hose to the hydraulic cylinder. The Cable Spiking chisel which is made of special alloy steel and hardened is connected to the piston of the Hydraulic cylinder. When the cylinder is operated thru the Hydraulic hand pump, the chisel pierce into the cable to reach the conductor. The Cylinder is mounted on a Rectangular shaped tubular steel body which is placed on cable dia and locked with the lower base clamp by threaded steel rods on both the side. A separate earthing cable of approx. 6 mtrs. long crimped at one end with suitable lugs connected with the tool and the other end is having the earthing rod for grounding.

SAPSONS make HP Series Slim type Hand operated Hydraulic crimping tool with built-in hydraulic pump, is one of the unique tool for crimping both aluminium and copper lugs and ferrules. These Crimping Tools are light in weight, easy to use and easy to carry. The HP Series Hand Crimping Tools are supplied in specially melded plastic carrying case, with hex dies of size from 10 to 300 sq.mm. The HP Series Hand Crimping Tools are very useful for electrical maintenance engineers and contractors, as they are very handy and easy to carry anywhere. * MODEL NO. SAP-HP-300

HP series : slim-type hand-operated hydraulic crimping tools are designed for hexagonal crimping of aluminum/copper lugs as well as ferrules, and come with a built-in hydraulic pump. Supplied in a specially molded plastic carrying case, these crimping tools are lightweight, portable and easy to use, making them ideal for electrical maintenance engineers and contractors. Size: 10 sq. mm to 300 sq. mm

A foot operated switch is a pedal-style control device used to activate or deactivate machines, tools, or electrical equipment using your foot. These tools are designed to improve workflow efficiency, precision, and safety, especially in hands-busy environments like workshops, factories, medical facilities, and construction sites.

Salient Features: - Sturdy pillar (H frame/C frame type) - Standard or custom design that suits various needs and a wide range of applications - Superior quality electrical and hydraulic components used - Programmable logic control circuits can be provided on request - Special decompression and bumping circuits to extend service life - Structure qualifies standard acceptance tests - Designed to withstand higher overloads - Actuators/cylinders used are made of tubes & seals of international standards - Low maintenance - 2-400 ton pressing capacities - Comes with a manual for operating electrical controls Applications - Deep draw, crimping, punching, bending and straightening - Coining, compacting and sintering - Concrete paver block and tile manufacturing - Rubber moulding and Bakelite mounting and briquetting - Wax, malt coffee and juice extraction - Scrap bailing "

Sapsons hydraulic power packs are designed and manufactured using the latest technology to serve mobile as well as industrial applications (small and large duty) around the world. We design and build customized hydraulic power packs for specific customer requirements too. Our power packs are built using mounting & manifold-valve assembly of international standards, and hydraulic elements of reputed makes. They can be provided with the electrical relay/CNC/PLC control systems too. Complete turnkey projects are undertaken. Additionally, we also undertake retrofitting, reconditioning, and upgrading of customer’s hydraulic systems.

Electronic Torque produced by SAPSONS Electric Tube Expansion Drive Unit is governed by a separate Electronic Control Panel which is adjusted by a simple Digital Display. When the Electrically Driven Motors reaches the desired Torque, the Control Unit Mechanism automatically shuts off the Power and on pressing the Reverse Button the Tube Expander retracts out from the Tube .The fully Automatic system ensures the Tubes are rolled to maximum tightness without inducing excessive cold worked stress in Tube Metal, injuring Tube ends or distorting Tube Sheet Ligaments. * SM-0 * SM-2 * SM-3 * SM-1

SAPSONS manufacturers complete range of Transmission Line Tools . Our Hydraulic stringing (Compression ) machine available with both hand operated and power operated pumps. These tools are specially designed to work perfectly on all sizes of AAA, AAAC, ACSR conductors (namely Panther, Moose, Dog and Zebra, etc.) of EHV transmission lines. The crimping blocks (dies) of the Compressor Machines are made out of special alloy steel, heat-treated and chrome plated for best result out of it. Used for Mid-Span joints and dead-end joints, our tool ensures the same mechanical strength and electrical conductivity that of solid conductors. The compressor machines are available in both Single & Double pump model. List of Sapsons Transmission Line Tools: 1. Hydraulic Stringing Tool – Manual / Petrol / Electric Operated 2. Hydraulic Operated ACSR Conductor Cutter 3. Drum Lifting Jacks – 3, 6 And 10 Tons 4. Turn Table 5. Turn Buckle 6. Sagging Winch 7. Power Winch 8. Industrial Rope Pulley 9. Bolted Type Come Along Clamp – 4 & 7 Bolts & Automatic 10. Aerial Roller – 300, 400, 600 And 800 Mm

Spring Balancers - are most scientifically designed for suspending and balancing the object , at required height. Working on the principle of Coiled spring, it ensures constant tension throughout the entire cable travel, to ensure fatigueless operation. Manufactured from High grade Aluminium casting, it is compact in design and light in weight. With Forged swivel top hook for 360 deg. Rotation, it has built-in safety locking mechanism, to prevent any unforeseen accident, due to spring failure. Salient Features: - Specially designed to free the operator from the weight of hand tools, thereby reducing operator fatigue. - Allows easy handling, as the weight of the loaded balancers and pressure required for operation is counter balanced in the containerized (main) spring mechanism of the spring balancers itself. - Provides maximum impact resistance due to the rugged construction of spring balancer (as main housing and cover plate are manufactured from high tensile lightweight aluminium alloy. - Ensures maximum safety due to forged steel upper support hook and bottom suspension hook assemblies. - Good flexibility and fall safety as a result of cables made using standard flexible wire rope . - Unique, tapered cable drum design that matches the middle turns of spring balancers where the optimum torque build-up is constant; provides smooth and even cable tensions throughout the entire cable travel length. - Easily accessible external tension adjustment, using which required tension can be set through a hardened worm form gear system; no special tool required. - Swivel on top hook allows 360° rotation positioning the spring balancers for easiest cable flow; prolongs cable life. - Automatic Drum Lock arrangement to prevent the load from falling in case spring balancer lowers sharply. - Suspended tools can be easily engaged or disengaged using the manual drum lock, making changeover safe, simple and quick; reduces downtime. Applications : Portable Hand Tools, Welder Guns, Spray guns, Short Blast Guns, Drifting Attachments in mines and Quarries, Jute and synthetic bag closing machines, Gauges, Jigs and Fixtures, Pendant Station, Switch Button of Hoists, in case of de-oxidation, water washing of plating work with raising and lowering of work etc. Design : Overhead Spring Balancers are specially designed to free the operator from weight of the hand tools or any other object, which is handled by human, for hours, continuously. When properly balanced by adjusting spring tension, the tools become almost weightless in the hands of the operator and can be moved up and down with very little effort. Advantages: 1. Increases Productivity – Balancers Keep Poised For Action, Minimize Motions Required To Bring Tool From Rest To Work Positions. 2. Extends Tool Life - Balancers Eliminate Pick-Up And Lay Down Wear And Prevent Damage From Dropping. 3. Reduces Operator Fatigue – A Balancer Makes The Heaviest Tool Light As A Feather. Operator Effort Can Be Directed To Controlling The Tool Rather Than Supporting. 4. No Need Of Power – There Is No Need Of Electrical Or Mechanical Power. 5. Increases Safety – Balancers Keep Work Area Uncluttered To Reduce Chances Of Damages Of Accessories Or Accidental Start-Up Of Tools During Handling. 6. Effective Use Of Space – The Working Place Being Widely Utilized, And Also To Be Cleaned Up, The Production Is Smoothly Carried Out.