It is a Shaft consist of Inner Core ,Outer casing Motor Coupling and Hand piece. It is designed to penetrate in to the tube inner dia, flexibly even into the bend tubes, without damaging the inner surface of the tube, and capable of transmitting rotary power from the Power unit to the tool head or brush. INNER WIRE CORE is flexible shaft's most important working element. It is designed and constructed to meet power drive operating conditions that include torque, speed, length and minimum bend radius. At the centre of the core is a single wire around which successive multi-stranded layers of wires are wrapped. Each layer is wound in the opposite direction and at right angles to the layer directly beneath it. The direction in which the wire on the outer most layer is wound determines the direction in which the shaft is designed to rotate. OUTER CASTING made of galvanized steel strip and is internally reinforced with antifriction lining to support the wire core and resist the torque. Outer casing does not rotate but protect the inner core and the tube inner dia. HANDPIECE is attached to one end of the shaft, either detachable or fixed type, with threaded spindle to connect tool heads or brushes. MOTOR COUPLING is fitted to the other end of the shaft, either threaded type or shear pin type, connected to the main power unit. Available in 25mm(1”) , 32mm(1.1/4”) and 36mm(1.3/8”) OD with 12mm(1/2”),16mm (5/16”) and 19 mm(3/4”) inner core respectively, with various length of 6 to 22 mtrs. Long. Longer length is also available on request.

SAPSONS Extra Heavy Duty Slugging / Striking Wrenches are designed for use with hammers where impact or shock loading is required for loosening of frozen and rusty nuts and bolts. These slugging wrenches are duly forged from superior grade special alloy steel. The blanks are duly machined with the wrench openings broached to close tolerance as per federal specifications and undergo a heat treatment process including stress relieving before undergoing short blasting and surface finish operations. SAPSONS Slugging Wrenches are guaranteed for superior performance and durability. Slugging Wrenches are available in – RING PROFILE- Straight Flat , Box type & Offset Handle, OPEN JAW PROFILE– straight Flat and Offset handle , STRUCTURAL WRENCHES – Both Tapered Handle and Tubular Handle types CASTELLED WRENCHES or any special profiles to suit customer’s specific requirements. SAPSONS Slugging Wrenches are available in a range of sizes from 22 mm to 230 mm (7/8" to 9.1/8") across flat. These are suitable for most rigid applications and are useful for fertiliser plants, refineries, petrochemicals, heavy engineering industries, railways, iron and steel manufacturing plants, thermal power stations, etc. Features: * One Piece Forged Construction * Extra Heavy Duty High Impact Resistant * Greater Head Deptt. * Guaranteed Against Premature Failure * Large Striking Face

FEATURES & APPLICATIONS : • Used to cut conductors up to 40 MM DIA • Operation similar to a hydraulic jack • Knob-handle is turned to enable lineman to operate pump handle • When cut is completed, knob is turned in opposite direction to allow cutting head to open • Epoxiglass pole, handle and hydraulic hose have been tested upto 700 bar working pressure. • Hydraulic oil grade 68 is used in Hand pump. • Hose has a minimum burst strength of 15,000 PSI • Features include jaws designed to cut without flattening conductor. • Jaws are made out of special alloy steel for long and trouble free application • Well balanced, requiring minimum effort to cut large conductors.

Air Hammers – High-Performance Pneumatic Tools for Heavy-Duty Applications Air Hammers, also known as pneumatic hammers, are powerful tools designed for high-impact tasks such as cutting, chipping, carving, or breaking hard materials like metal, stone, or concrete. Powered by compressed air, these tools offer superior performance, precision, and control—making them ideal for automotive repair, metal fabrication, construction, and demolition work.

‘HJ’ Series : Hydraulic Crimping Tools are made out of Solid Special Alloy Steel, where weight is not an issue to the customer, and it is mainly used in manufacturing plants, with Crane facility. These tools are Economy model but heavy in design. HJ Series Hydraulic Crimping Tools are available for crimping Copper and Aluminum Cable terminal ends up to 400 Sq.mm with Ring or Hex dies. Construction and Working: The Crimping Jack and Hydraulic Pump are connected with 2 Mtrs. long Hydraulic Hose pipe and the Hydraulic Hand pump is designed to develop Pressure of up to 250 Kg/ Sq.mm. The mechanism within the pump controls the pressure developed, while crimping and safety valve prevents overloading.

SAPSONS ‘FT’ Series Foot operated Hydraulic Crimping Tools are one of our Unique design, supplied with Heavy duty Foot operated Pump - with sturdiest design, fitted over Heavy steel frame, for well-balanced operation. These are suitable for crimping Copper and Aluminium Cable terminal ends and in-line Connectors upto 1200 Sq.mm. Our FT Series Hydraulic Crimping Tools are equipped with in-built Safety release valve, to prevent the overloading, thus protecting both Pump & Crimping Head. Available Models: * SAP-FT-400 – Capacity: 50.0 To 400.0 Sq. Mm (Supplied With Set Of 9 Sizes Of Dies) * SAP-FT-630 – Capacity: 240.0 To 630.0 Sq. Mm (Supplied With Set Of 5 Sizes Of Dies) * SAP-FT-1000 – Capacity: 500.0 To 1000.0 Sq. Mm (Supplied With Set Of 4 Sizes Of Dies) * SAP-FT-1200 – Capacity: 500.0 To 1200.0 Sq. Mm (Supplied With Set Of 5 Sizes Of Dies) * Special Model Can Be Supplied With Additional Dies, As Per Customer’s Need. * Extra Long Hose Can Be Supplied With Tool On Request, At Extra Cost. The FT Series Hydraulic Crimping Tools that we provide are suitable for any heavy duty crimping applications, to be done at ground positions. Hydraulic crimping head is slim in Design, suitable for easy accessibility inside the panels and confined areas, where other tools cannot be used. Available Models: * SAP-FT-400 – Capacity: 50.0 To 400.0 Sq. Mm (Supplied With Set Of 9 Sizes Of Dies) * SAP-FT-630 – Capacity: 240.0 To 630.0 Sq. Mm (Supplied With Set Of 5 Sizes Of Dies) * SAP-FT-1000 – Capacity: 500.0 To 1000.0 Sq. Mm (Supplied With Set Of 4 Sizes Of Dies) * SAP-FT-1200 – Capacity: 500.0 To 1200.0 Sq. Mm (Supplied With Set Of 5 Sizes Of Dies) * Special Model Can Be Supplied With Additional Dies, As Per Customer’s Need. * Extra Long Hose Can Be Supplied With Tool On Request, At Extra Cost.

SAPSONS ‘HD’ Series Hydraulic Crimping Tools is designed for crimping with Ring or Hex dies to crimp Copper / Aluminium Cable terminal ends/ Ferrules upto 1200 Sq. mm, powered by Heavy duty powerful Hand Pump. The Crimping Head and Hydraulic Hand Pump is connected with 2 Mtr. long Hydraulic Hose pipe and the Hydraulic Hand pump is designed to develop Pressure from 300 to 700 Bar. The crimping Head is Slim in design and made from Solid Special Alloy Steel to withstand the pressure developed while crimping. The mechanism within the pump controls the pressure developed, while crimping and safety valve prevents overloading. This Slim type Hand held Hydraulic crimping head is suitable for Heavy duty crimping and can be easily used inside the panels, very confined areas, critical positions and very critical applications. Available Models: * SAP-HD-400 – Capacity: 50.0 To 400.0 Sq. Mm (Supplied With Sets Of 9 Sizes Of Dies) * SAP-HD-630 – Capacity: 240.0 To 630.0 Sq. Mm (Supplied With Sets Of 5 Sizes Of Dies) * SAP-HD-1000 – Capacity: 500.0 To 1000.0 Sq. Mm (Supplied With Sets Of 4 Sizes Of Dies) * SAP-HD-1200 – Capacity: 500.0 To 1200.0 Sq. Mm (Supplied With Sets Of 5 Sizes Of Dies) * Special Model Can Be Supplied With Additional Dies, As Per Customer’s Need. * Extra Long Hose Can Be Supplied With Tool On Request, At Extra Cost.

Periodic cleaning of Tube Inner dia in Processing Equipment like BOILERS, Air Heaters , Evaporators and Sugar Refining vessels is very essential for its better performance and longer life. Our Flexible Shaft Machines are designed to meet customer’s expectation, with rugged construction, simple to operate, minimum maintenance and trouble free service. It is a self-contained portable unit, fitted with lifting or carrying handle. It consists of a TEFC, continuously rated, squirrel cage, 440 volts, 3 phase, 50 C/S, AC electric motor. Standard machines are available with 3, 5 & 7.5 HP and Free speed of 2880 or 1440 RPM. It is controlled by a push button starter, with features like single phase protection, overload and under voltage protection. In addition it is also ambient temperature compensated. Each machine is fully wired, carefully tested and is supplied with a 20 feet long power cable .

SAPSONS Hydraulic Hoses manufactured from premium quality raw material, for better quality and longer life. Specially designed with high Testing and bursting ratio, our Hydraulic Hoses, available up to 15000 PSI (1000 Bar). Our SAPSONS Heavy Duty Hydraulic Hoses are available in 4, 6, 10 mtrs long with end connectors, suitable for all SAPSONS Make Crimping tools. Hoses with longer length also can be supplied on request. Heavy duty Hydraulic hoses available in all sizes and for various applications. Salient Features: - High burst test ratio, which makes it safer for operators - Sturdy construction - Resistance against corrosion - High tensile strength - Good value for money - Can be supplied with pressure ratings up to 15000 PSI (1000 Bar)"