SAPSONS HYDRAULIC CABLE SPIKING TOOL is specially designed to ensure the absence of voltage in low voltage and Medium voltage power cables before undertaking any electrical maintenance work. Human life is precious and by using our Cable spiking tool, the safety of the Electrical team is ensured. They can simply check the Power cable and eliminate accident. What is cable Spiking tools? Cable Spiking tool is one of the Safety tools used to protect the Electrical workers from any Electrical accident while carrying out cable repair, maintenance, jointing or end termination etc... The cable spiking chisel pierces the sheath of the cable, as well as its insulation, to reach the main conductor. If the cable is powered prior to cutting, an arcing fault is caused by breaking down the insulation. Why are spike tool used? Cable spiking tool is used to ensure that the power cable under maintenance is not live. Cables are spiked with the help of Cable spiking tool and confirm the circuit is not Live. It is one of the very important safety procedure universally followed and the Cables are preliminarily spiked before carrying out jointing or terminating of faulty 11kV/33kV cables. Our Cable spiking tool is intended to prove that any power cable under maintenance is previously disconnected, is dead before starting the work, when these cables are undergoing repair, diversion or maintenance. The design of SAPSONS cable spiking tool is robust and reliable which consist of a hand operated hydraulic pump connected by a hydraulic hose to the hydraulic cylinder. The Cable Spiking chisel which is made of special alloy steel and hardened is connected to the piston of the Hydraulic cylinder. When the cylinder is operated thru the Hydraulic hand pump, the chisel pierce into the cable to reach the conductor. The Cylinder is mounted on a Rectangular shaped tubular steel body which is placed on cable dia and locked with the lower base clamp by threaded steel rods on both the side. A separate earthing cable of approx. 6 mtrs. long crimped at one end with suitable lugs connected with the tool and the other end is having the earthing rod for grounding.

FEATURES & APPLICATIONS : • Used to cut conductors up to 40 MM DIA • Operation similar to a hydraulic jack • Knob-handle is turned to enable lineman to operate pump handle • When cut is completed, knob is turned in opposite direction to allow cutting head to open • Epoxiglass pole, handle and hydraulic hose have been tested upto 700 bar working pressure. • Hydraulic oil grade 68 is used in Hand pump. • Hose has a minimum burst strength of 15,000 PSI • Features include jaws designed to cut without flattening conductor. • Jaws are made out of special alloy steel for long and trouble free application • Well balanced, requiring minimum effort to cut large conductors.

SAPSONS make HP Series Slim type Hand operated Hydraulic crimping tool with built-in hydraulic pump, is one of the unique tool for crimping both aluminium and copper lugs and ferrules. These Crimping Tools are light in weight, easy to use and easy to carry. The HP Series Hand Crimping Tools are supplied in specially melded plastic carrying case, with hex dies of size from 10 to 300 sq.mm. The HP Series Hand Crimping Tools are very useful for electrical maintenance engineers and contractors, as they are very handy and easy to carry anywhere. * MODEL NO. SAP-HP-300

Hydraulic tube pullers can be used for both continuous tube pulling as well as stub pulling. Consists of - Hydraulic power pack - Pulling gun - Hose and other consumable accessories. Salient Features - Removes tubes without any damage to tube sheet - Interchangeable pulling gun with the same power pack - Compact design of pulling gun and power pack - Available for continuous pulling of up to 3" OD, and stub pulling of up to 4" OD - Saves time and money Tube Size: 3/8" - 3" (9.5 - 75 mm) OD for continuous pulling

Salient Features: - Sturdy pillar (H frame/C frame type) - Standard or custom design that suits various needs and a wide range of applications - Superior quality electrical and hydraulic components used - Programmable logic control circuits can be provided on request - Special decompression and bumping circuits to extend service life - Structure qualifies standard acceptance tests - Designed to withstand higher overloads - Actuators/cylinders used are made of tubes & seals of international standards - Low maintenance - 2-400 ton pressing capacities - Comes with a manual for operating electrical controls Applications - Deep draw, crimping, punching, bending and straightening - Coining, compacting and sintering - Concrete paver block and tile manufacturing - Rubber moulding and Bakelite mounting and briquetting - Wax, malt coffee and juice extraction - Scrap bailing "

Hydraulic Bearing Pullers : Hydraulic Bearing Pullers are specialized tools designed to safely and efficiently remove bearings, gears, pulleys, and other press-fitted parts from shafts or housings without causing damage to the components or machinery.

SAPSONS Hydraulic Hoses manufactured from premium quality raw material, for better quality and longer life. Specially designed with high Testing and bursting ratio, our Hydraulic Hoses, available up to 15000 PSI (1000 Bar). Our SAPSONS Heavy Duty Hydraulic Hoses are available in 4, 6, 10 mtrs long with end connectors, suitable for all SAPSONS Make Crimping tools. Hoses with longer length also can be supplied on request. Heavy duty Hydraulic hoses available in all sizes and for various applications. Salient Features: - High burst test ratio, which makes it safer for operators - Sturdy construction - Resistance against corrosion - High tensile strength - Good value for money - Can be supplied with pressure ratings up to 15000 PSI (1000 Bar)"

SAPSONS hydraulic hand pumps are suitable for various applications, like lifting, pressing, crimping ,jacking, and all other general applications. SAPSONS Heavy duty Hydraulic Hand Pumps are available up to 700 bar max. working pressure both in Single & Two Speed. Types: 1. Portable Hand Pumps– Single And Two Speed Compact Hydraulic Pumps, Very Useful Where Performance With Portability Is Preferred. 2. Heavy Duty Hand Pumps – Two Speed Pumps –With Auto Change Over From High Discharge At Low Pressure To Low Discharge At High Pressure. Once The Equipment Reaches The Load ,The Pump Automatically Change Over To High Pressure. 3. High Flow Hydraulic Hand Pumps – Heavy Duty Hand Pumps With Bigger Oil Capacity , Suitable For Double Acting Cylinders And Other Equipment. Specialities: * Easy, Effortless To Handle * Corrosion Resistant * Robust Construction * Reasonable Price.

SAPSONS Hydraulic Cylinders are recognized for its high quality and standard. Our Large and Small Hydraulic Cylinders find various applications in different industries. Available in Single acting with Spring Return, Load Return, Flat Jacks, Low Profile, and Double Acting, Center Hole, Spring Return, Pull, Aluminum Cylinders. We also offer Custom built Hydraulic Cylinders as per the specification and application of our customer.