The Clean cut solution to removing frozen nuts. Hydraulic Nut Splitter is very useful tool for Processing Industries like Pharmaceuticals, Chemical plants, Fertilizers etc, where the atmosphere is corrosive or Industries which located near Sea-shore. In both the cases, the Fasteners often get corroded, and during routine maintenance or preventive maintenance, it is very difficult to open the Nuts, by manually or thru impact applications. SAPSONS Nut Splitters offer end to end solution of cutting frozen nuts, in such situation. Our Nut Splitter Tool is effectively used for removing heavily corroded, seized nuts quickly, quietly and safely without damaging the bolt and stud threads. Sapsons Nut-Splitter now you can easily remove heavily corroded, seized nuts quickly, quietly and safely. Fast : To remove a 90 mm nut with a torch or hammer and chisel might take upto 30 minutes. But yoy only need 20-30 seconds with our Sapsons Nut Splitter. Safe: No hammer, no impact. Operator has hands off during operation. No sparks, No Flames, No risk to volatile environments. Sapsons Nut Splitter cuts smoothly, with no flying fragments. Quiet : All you will hear is the hiss of the hydraulic pump and a reassuring " snap" when the nut is split. Precise: You can easily calibrate the cutting chisel so only the nut is split, with no damage to the bolt or stud threads. Versatile : SAPSONS NUT SPLITTER cuts through even the hardest nuts, including ASTMA194 Brinell hardness 248-352. And each model of SAPSONS NUT SPLITTER can be used for a wide range of metric or inch nut sizes. It Saves You Money : Nut removal takes less time, so downtime is reduced. And with SAPSONS NUT SPLITTER, you can avoid costly damage to bolts, studs and surrounding equipment.

SAPSONS Automatic Grooving Tool besides Catering to various applications for Internal Grooving is specially designed for Matching Grooves in Tube Sheet Holes to aid in Locking Rolled Tubes into Position during Tube Expansion. It incorporates the Proven and accepted Principle of an eccentric Tool Holder turning on its own Axis. As the Tool moves into the work piece/ Tube Sheet, the Pilot nose contacts the face of the work piece/ Tube Sheet, the cutter is now in the position to cut. Continued movement of the Tool starts the feed stroke which actuates the cutter and feeds it readily into the work. The location of cut is controlled by a quick lock Adjustable Collar, the depth of cut is also controlled by a Quick Lock-Stop Nut, which permits simple, fast and accurate adjustments. Features: 1. Accurate and Quick 2. Covers wide range of bores by simply changing cutters & pilot nose 3. User friendly easy to adjust length & depth of cut 4. Automatic two in one design 5. Form cutter and tool bit with different groove configuration can be supplied

SAPSONS HYDRAULIC CABLE SPIKING TOOL is specially designed to ensure the absence of voltage in low voltage and Medium voltage power cables before undertaking any electrical maintenance work. Human life is precious and by using our Cable spiking tool, the safety of the Electrical team is ensured. They can simply check the Power cable and eliminate accident. What is cable Spiking tools? Cable Spiking tool is one of the Safety tools used to protect the Electrical workers from any Electrical accident while carrying out cable repair, maintenance, jointing or end termination etc... The cable spiking chisel pierces the sheath of the cable, as well as its insulation, to reach the main conductor. If the cable is powered prior to cutting, an arcing fault is caused by breaking down the insulation. Why are spike tool used? Cable spiking tool is used to ensure that the power cable under maintenance is not live. Cables are spiked with the help of Cable spiking tool and confirm the circuit is not Live. It is one of the very important safety procedure universally followed and the Cables are preliminarily spiked before carrying out jointing or terminating of faulty 11kV/33kV cables. Our Cable spiking tool is intended to prove that any power cable under maintenance is previously disconnected, is dead before starting the work, when these cables are undergoing repair, diversion or maintenance. The design of SAPSONS cable spiking tool is robust and reliable which consist of a hand operated hydraulic pump connected by a hydraulic hose to the hydraulic cylinder. The Cable Spiking chisel which is made of special alloy steel and hardened is connected to the piston of the Hydraulic cylinder. When the cylinder is operated thru the Hydraulic hand pump, the chisel pierce into the cable to reach the conductor. The Cylinder is mounted on a Rectangular shaped tubular steel body which is placed on cable dia and locked with the lower base clamp by threaded steel rods on both the side. A separate earthing cable of approx. 6 mtrs. long crimped at one end with suitable lugs connected with the tool and the other end is having the earthing rod for grounding.

Sapsons Tool Bags Are Available For Various Applications And Industries. These Products Are Made From Polyester, Nylon ,cotton, canvas and leather, or any other material, as per the customer’s needs. Bags are available with or without tools. Most of our standard bags are made out of water proof Nylon material, and suitable for rouge handling. The designing of these bags are done with the convenience of use and durability, in mind. Bags can be supplied by us, as per customer’s design, on request.

SAPSONS make HP Series Slim type Hand operated Hydraulic crimping tool with built-in hydraulic pump, is one of the unique tool for crimping both aluminium and copper lugs and ferrules. These Crimping Tools are light in weight, easy to use and easy to carry. The HP Series Hand Crimping Tools are supplied in specially melded plastic carrying case, with hex dies of size from 10 to 300 sq.mm. The HP Series Hand Crimping Tools are very useful for electrical maintenance engineers and contractors, as they are very handy and easy to carry anywhere. * MODEL NO. SAP-HP-300

Sapsons SKT series knockout tools are used to punch tubes/tube stubs out of tube sheets. They're used manually or with pneumatic chipping hammer (either directly or after the collapse of tube-ends). Tube Size: 3/8"- 4"(9.5 - 101.6 mm) OD

Tube Collapsing Tools are specialized mechanical devices used primarily in manufacturing, maintenance, and decommissioning processes to intentionally deform or crush tubing. The goal is to collapse the tube structure, making it unusable for further operation or ensuring it is securely sealed or destroyed. These tools are common in industries such as nuclear power, petrochemical, heat exchanger manufacturing, and aerospace. Tube Size: 3/8' - 2.1/2' (9.5 - 63.5 mm) OD

Under Hand Crimping Tools, put text : PL series: Fitted with jaws, Sapsons hand-operated plier-type PL series crimping tools are designed to have better metal-to-metal contact between wires and non-insulated cable terminal ends. Size: 0.5 sq. mm to 16.0 sq. mm GD series: Sapsons GD series bench-type hand crimping tool is suitable for bench-mounted crimping and production line applications. Size: 10 sq. mm to 185 sq. mm GP series: Sapsons GP series mechanical gear-powered hand-operated crimping tool is a multi-stroke tool with ratchet & pin lock, and a rapid motion with maximum handle opening of 90°. This lightweight yet sturdy tool comes with interchangeable hex-type dies and is incredibly handy for carrying out tasks in a remote setting. Size: 25 sq. mm to 400 sq. mm

Riveting Tools: Riveting tools are specialized tools used to install rivets, which are fasteners used to join materials together—typically metal or plastic in a permanent and strong way. Riveting is commonly used in construction, automotive, aircraft, and manufacturing industries.