Tool Heads is fitted to the Flexible shaft to remove scale and hard deposits from inside the tubes of Processing Equipment. Available in Fixed type with Three and Spring type with 15 Sharp revolving Cutters, it chip the scale at high speed and the resultant centrifugal force. All parts are manufactured from special Alloy steel and heat treated for longer life. For Medium Size Straight Tubes: * PAD Type Arrowhead Drill For Opening Blocked Tubes * PBT Type Boring Tool For Cleaning Semi blocked * PSL Type Spring Loaded For Hard And Obstinate Scale * PDH Type Double Head For Hard And Medium Scale * PAD/UJ Type Drill Head With Universal Joint For Thick Scale * PPA Type Pivoted Arm For Uneven Hard Scale * PSF Type Swing Frame For All Types Of Scale * PSH Type Single Head For Hard And Medium Scale * WBA Type Cup Shaped For Scouring Of Thin Hard Scale * PTH Type Turk's Head For Scouring After Descaling * PDS Type Double Spiral For Scouring Carbon Scale * PGP Type General Purpose For Debarring Polishing Etc.

Sliding T - Handle is used for driving of manually operated sockets. It has a large leverage handle which allows application of force comfortably. The final tightening can be done with both hands. The sliding T-head is provided with a ball to arrest movement of handle at any desired position. Available in 1/4", 3/8", 1/2", 3/4", 1" and 1.1/2 " Square Drives.

Impact Drivers : An impact driver is a power tool designed for driving screws and bolts with high torque by delivering rapid, strong rotational impacts. Unlike regular drills, impact drivers combine rotational force with quick bursts of concussive force (impacts) to loosen or drive fasteners more efficiently. Sizes: 1/4' hexagonal drive with maximum torque capacity of approximately 270 Nm.

Screw Drivers : A screw driver is a hand tool or power tool used to drive (insert) or remove screws. It works by applying rotational force (torque) through its tip, which fits into the screw head. Sizes: 1/4' hexagonal drive with maximum torque capacity of approximately 16 Nm.

It is a Shaft consist of Inner Core ,Outer casing Motor Coupling and Hand piece. It is designed to penetrate in to the tube inner dia, flexibly even into the bend tubes, without damaging the inner surface of the tube, and capable of transmitting rotary power from the Power unit to the tool head or brush. INNER WIRE CORE is flexible shaft's most important working element. It is designed and constructed to meet power drive operating conditions that include torque, speed, length and minimum bend radius. At the centre of the core is a single wire around which successive multi-stranded layers of wires are wrapped. Each layer is wound in the opposite direction and at right angles to the layer directly beneath it. The direction in which the wire on the outer most layer is wound determines the direction in which the shaft is designed to rotate. OUTER CASTING made of galvanized steel strip and is internally reinforced with antifriction lining to support the wire core and resist the torque. Outer casing does not rotate but protect the inner core and the tube inner dia. HANDPIECE is attached to one end of the shaft, either detachable or fixed type, with threaded spindle to connect tool heads or brushes. MOTOR COUPLING is fitted to the other end of the shaft, either threaded type or shear pin type, connected to the main power unit. Available in 25mm(1”) , 32mm(1.1/4”) and 36mm(1.3/8”) OD with 12mm(1/2”),16mm (5/16”) and 19 mm(3/4”) inner core respectively, with various length of 6 to 22 mtrs. Long. Longer length is also available on request.

Sapsons air to water intensifier/hydro pneumatic reciprocating pumps are an efficient, low cost alternative to motorised and hand-operated pumps. Salient Features: - Compact & lightweight, and can be mounted in any orientation - Low air consumption when used in conjunction with a low pressure, high discharge centrifugal prefill pump and hence, the energy consumption and time for building desired pressure is very low (There is no further consumption of compressed air once the pressure has built up) - Automatic leakage compensation to maintain set pressure - Pneumatically actuated components allow for usage even in explosive environments - Designed for use with water and other non-corrosive liquids as all parts that are in contact with the liquid are made from stainless steel and brass - Suction port can be rotated 360° for easy installation, and non-return valve assembly can be easily dismantled for quick servicing Applications - Hydrostatic pressure testing of castings, valves, hoses, pressure vessels etc. - Cyclic pressure or life testing of pressure guages, pressure switches, hoses etc. - Burst strength testing of pressured vessels such as LPG/nitrogen/oxygen gas cylinders, storage tanks, hoses, pipes etc. - Seat leakage test of control valves - Operation of single acting hydraulic cylinders used in hydraulic clamps, lifting platforms, compression moulding presses etc. - Isotactic pressing of powder metals and ceramics - Transferring of liquids from barrels, storage tanks etc. - Pumping oil/grease in centralised lubrication systems"

SAPSONS make soft-faced hammers and mallets are designed to transmit the whole force of blow safely and effectively. Also available, raw-hide hammers as per customer requirement. Under Nylon Tip Hammers / Raw hide hammers, heading: Salient Features * Designed to avoid bouncing blows * Comes with a special filling insert in the hammer head, which allows a significantly higher striking effect as compared to standard recoilless hammers * Special filling seamlessly absorbs the counter pulse triggered by the hammer head * Universal use for assembly and service work * Can be supplied as hammers or mallets with polyamide or raw-hide tips as per specific customer requirements