'various length'

It is a Shaft consist of Inner Core ,Outer casing Motor Coupling and Hand piece. It is designed to penetrate in to the tube inner dia, flexibly even into the bend tubes, without damaging the inner surface of the tube, and capable of transmitting rotary power from the Power unit to the tool head or brush. INNER WIRE CORE is flexible shaft's most important working element. It is designed and constructed to meet power drive operating conditions that include torque, speed, length and minimum bend radius. At the centre of the core is a single wire around which successive multi-stranded layers of wires are wrapped. Each layer is wound in the opposite direction and at right angles to the layer directly beneath it. The direction in which the wire on the outer most layer is wound determines the direction in which the shaft is designed to rotate. OUTER CASTING made of galvanized steel strip and is internally reinforced with antifriction lining to support the wire core and resist the torque. Outer casing does not rotate but protect the inner core and the tube inner dia. HANDPIECE is attached to one end of the shaft, either detachable or fixed type, with threaded spindle to connect tool heads or brushes. MOTOR COUPLING is fitted to the other end of the shaft, either threaded type or shear pin type, connected to the main power unit. Available in 25mm(1”) , 32mm(1.1/4”) and 36mm(1.3/8”) OD with 12mm(1/2”),16mm (5/16”) and 19 mm(3/4”) inner core respectively, with various length of 6 to 22 mtrs. Long. Longer length is also available on request.

SAPSONS Hydraulic Hoses manufactured from premium quality raw material, for better quality and longer life. Specially designed with high Testing and bursting ratio, our Hydraulic Hoses, available up to 15000 PSI (1000 Bar). Our SAPSONS Heavy Duty Hydraulic Hoses are available in 4, 6, 10 mtrs long with end connectors, suitable for all SAPSONS Make Crimping tools. Hoses with longer length also can be supplied on request. Heavy duty Hydraulic hoses available in all sizes and for various applications. Salient Features: - High burst test ratio, which makes it safer for operators - Sturdy construction - Resistance against corrosion - High tensile strength - Good value for money - Can be supplied with pressure ratings up to 15000 PSI (1000 Bar)"

SAPSONS Automatic Grooving Tool besides Catering to various applications for Internal Grooving is specially designed for Matching Grooves in Tube Sheet Holes to aid in Locking Rolled Tubes into Position during Tube Expansion. It incorporates the Proven and accepted Principle of an eccentric Tool Holder turning on its own Axis. As the Tool moves into the work piece/ Tube Sheet, the Pilot nose contacts the face of the work piece/ Tube Sheet, the cutter is now in the position to cut. Continued movement of the Tool starts the feed stroke which actuates the cutter and feeds it readily into the work. The location of cut is controlled by a quick lock Adjustable Collar, the depth of cut is also controlled by a Quick Lock-Stop Nut, which permits simple, fast and accurate adjustments. Features: 1. Accurate and Quick 2. Covers wide range of bores by simply changing cutters & pilot nose 3. User friendly easy to adjust length & depth of cut 4. Automatic two in one design 5. Form cutter and tool bit with different groove configuration can be supplied

Sapsons Tool Bags Are Available For Various Applications And Industries. These Products Are Made From Polyester, Nylon ,cotton, canvas and leather, or any other material, as per the customer’s needs. Bags are available with or without tools. Most of our standard bags are made out of water proof Nylon material, and suitable for rouge handling. The designing of these bags are done with the convenience of use and durability, in mind. Bags can be supplied by us, as per customer’s design, on request.

Sanders :Sanders tools are power tools used for smoothing or shaping surfaces, typically wood, metal, or plastic, by abrasion with sandpaper. They come in various types, each suited for specific tasks in carpentry, woodworking, automotive repair, metalworking, and even home improvement.

Condenser Tube Cleaner Kit is Pneumatic operated system, designed to clean straight tubes in Heat Exchangers, condensers, coolers, chillers etc. These equipment contain many small diameter tubes which vary from 3/8" to 1.1/4" in diameter and six to twenty feet or even more in length. Consists of Portable Pneumatic Drive, Water Flushing Attachment, Set Of Hollow Shafts and Couplings, Cleaning Heads Like Drill, Cutter and Brush along with air and Water Hoses, all supplied in suitable steel carrying case. The suitable cleaning head according to the tube ID, is connected thru thread in to the hollow shafts , which is again connected to the Pneumatic drive, and inserted into the tube. Number of shafts are connected thru couplings to increase the length , to cover the entire length of the tube, to be cleaned. A water flushing system is also attached to the drive to flush out the loose deposits out of the tube as well to keep the tool head cool. The Pneumatic drive runs at a speed of about 700 RPM , along with the water flow, and the tool head breaks the scale, while the water loosens the deposits. Very Handy and user friendly, this equipment is very useful to those Industries, where periodical cleaning of tubes are mandatory.

Trimming of Tube ends in Condensers, Chillers, Heat Exchangers is one of the very important application, which needs proper tool. We have made it very simple with the SAPSONS tube end facers, which is available with Square , Flat and Round tool bits. It has the Hexagonal shank, to conveniently use with both Pneumatic and Electric power tools. Except in 3/8” OD tubes, One tool can be used for various thickness of tubes of same OD, by simply changing the Pilot Bush. Applications : * Tube End Facing / Trimming * Weld Trimming * Tube Flushing Sizes Available : 3/8” ( 9.5 mm ) to 2.1/2” ( 63.5 mm )

3 Plain Rollers with 1Flare Roller Tube Expanders, to suit Flare Type Tube Expansion of Boiler Tubes .To suit Tubes Ranging from 7/8" O.D to 4.1/2" O.D. A range of models available to cover Tube Expansion Length of 1/2" to 2.5/8".Drum / Header / Short Series Mandrels available, to suit specific applications.

3 Rollers Parallel Tube Expanders, to suit plain Tubes Expansion of Boiler Tubes. To suit tubes of sizes ranging from 7/8" O.D. to 4 1/2" O.D. A range of models available to cover Tube Expansion Lengths of 1/2" to 2.5/8".Drum / Header / Short Series Mandrels available, to suit specific applications.