It is a Shaft consist of Inner Core ,Outer casing Motor Coupling and Hand piece. It is designed to penetrate in to the tube inner dia, flexibly even into the bend tubes, without damaging the inner surface of the tube, and capable of transmitting rotary power from the Power unit to the tool head or brush. INNER WIRE CORE is flexible shaft's most important working element. It is designed and constructed to meet power drive operating conditions that include torque, speed, length and minimum bend radius. At the centre of the core is a single wire around which successive multi-stranded layers of wires are wrapped. Each layer is wound in the opposite direction and at right angles to the layer directly beneath it. The direction in which the wire on the outer most layer is wound determines the direction in which the shaft is designed to rotate. OUTER CASTING made of galvanized steel strip and is internally reinforced with antifriction lining to support the wire core and resist the torque. Outer casing does not rotate but protect the inner core and the tube inner dia. HANDPIECE is attached to one end of the shaft, either detachable or fixed type, with threaded spindle to connect tool heads or brushes. MOTOR COUPLING is fitted to the other end of the shaft, either threaded type or shear pin type, connected to the main power unit. Available in 25mm(1”) , 32mm(1.1/4”) and 36mm(1.3/8”) OD with 12mm(1/2”),16mm (5/16”) and 19 mm(3/4”) inner core respectively, with various length of 6 to 22 mtrs. Long. Longer length is also available on request.

Trimming of Tube ends in Condensers, Chillers, Heat Exchangers is one of the very important application, which needs proper tool. We have made it very simple with the SAPSONS tube end facers, which is available with Square , Flat and Round tool bits. It has the Hexagonal shank, to conveniently use with both Pneumatic and Electric power tools. Except in 3/8” OD tubes, One tool can be used for various thickness of tubes of same OD, by simply changing the Pilot Bush. Applications : * Tube End Facing / Trimming * Weld Trimming * Tube Flushing Sizes Available : 3/8” ( 9.5 mm ) to 2.1/2” ( 63.5 mm )

SAPSONS Hydraulic Hoses manufactured from premium quality raw material, for better quality and longer life. Specially designed with high Testing and bursting ratio, our Hydraulic Hoses, available up to 15000 PSI (1000 Bar). Our SAPSONS Heavy Duty Hydraulic Hoses are available in 4, 6, 10 mtrs long with end connectors, suitable for all SAPSONS Make Crimping tools. Hoses with longer length also can be supplied on request. Heavy duty Hydraulic hoses available in all sizes and for various applications. Salient Features: - High burst test ratio, which makes it safer for operators - Sturdy construction - Resistance against corrosion - High tensile strength - Good value for money - Can be supplied with pressure ratings up to 15000 PSI (1000 Bar)"

SAPSONS Stud Tighteners also known as Stud Drivers is used for speedier tightening of threaded studs with the help of an impact wrench. This is ideal for use in the assembly and maintenance of engines. The range covers stud diameters M5 to M36 (metric) & 1/4" (6.35mm) to 1.1/2" (38.1) UNF/BSF (SAE/BRITISH) in 3/8" to 1" square drives. The tool has a cross hole and groove for locking pin and ring arrangement. Stud Tighteners to suit BSW, BSF, UNC OR UNF Threaded studs also available on request. Extra long Deep Stud tighteners also can be supplied on request. FEATURES: Offered in various ranges from 3/8" to 1" Sq.Drive Sizes from M-5 to M-42 1/4" to1.1/2" in UNC/UNF/BSF/BSW

SAPSONS Double-Ended Ratchet Spanner with Hex / Bi-Hex drive at both ends is a very useful tool for productivity. Used for loosening & tightening of bolts / nuts without detaching / resetting the tool, due to its in-built Ratcheting mechanism, these tools helps to reduce the operator fatigue and increase the comfort. The range covers across flat sizes 8 mm to 24 mm and 5/16″ to 1″. We also manufacture Single End Heavy duty Female Hex, Bi-Hex and Square Drive RATCHET WRENCHES with the A/F sizes of upto 3” with long Handle for the maintenance of Turbines, Ships, and for various applications. Very Useful in general engineering industry, automobile Industries , Thermal, Gas and Hydel Power plants and mass production and servicing industries. Special Sizes as per customer requirement can be also made on request.

Castellated slugging wrenches and sockets are heavy-duty tools engineered for high-impact applications where traditional wrenches cannot deliver the required torque. These tools feature a castellated (slotted) head design, specifically intended to fit over slotted or castle nuts that require alignment for cotter pins or safety wire locking. Built from premium-grade alloy steel, these tools are designed to be struck with a hammer (slugged) to generate greater torque, making them ideal for loosening or tightening large, stubborn fasteners in demanding industrial environments. The castellated profile ensures a secure grip on specialized nuts, preventing slippage and damage during operation. These tools are commonly used in power plants, refineries, petrochemical facilities, mining operations, and heavy equipment maintenance where reliability and safety are critical. Castellated Slugging Wrenches : Available from 2' to 6' Sizes Castellated Sockets : Available in following sizes : 1.1/2 in. Sq. Drive 2.1/2 in. Sq. Drive 3.1/2 in. Sq. Drive

Sapsons Tool Bags Are Available For Various Applications And Industries. These Products Are Made From Polyester, Nylon ,cotton, canvas and leather, or any other material, as per the customer’s needs. Bags are available with or without tools. Most of our standard bags are made out of water proof Nylon material, and suitable for rouge handling. The designing of these bags are done with the convenience of use and durability, in mind. Bags can be supplied by us, as per customer’s design, on request.

Tube Plug are specialized tools used primarily in industries such as power generation, petrochemical, and HVAC for the installation or removal of tube plugs in heat exchangers, condensers, boilers, or chillers. Tube plugs are used to seal off damaged or leaking tubes to prevent system contamination or performance degradation. Sizes: 3/8' to 1.1/2' (9.5 - 38.10 mm) OD

Under Hand Crimping Tools, put text : PL series: Fitted with jaws, Sapsons hand-operated plier-type PL series crimping tools are designed to have better metal-to-metal contact between wires and non-insulated cable terminal ends. Size: 0.5 sq. mm to 16.0 sq. mm GD series: Sapsons GD series bench-type hand crimping tool is suitable for bench-mounted crimping and production line applications. Size: 10 sq. mm to 185 sq. mm GP series: Sapsons GP series mechanical gear-powered hand-operated crimping tool is a multi-stroke tool with ratchet & pin lock, and a rapid motion with maximum handle opening of 90°. This lightweight yet sturdy tool comes with interchangeable hex-type dies and is incredibly handy for carrying out tasks in a remote setting. Size: 25 sq. mm to 400 sq. mm