Products

Sliding T- Handle is used for driving of manually operated sockets. It has a large leverage handle which allows application of force comfortably. The final tightening can be done with both hands. The sliding T-head is provided with a ball to arrest movement of handle at any desired position. Available in 1/4", 3/8", 1/2", 3/4", 1" and 1.1/2" Square Drives.

Sapsons Tool Bags Are Available For Various Applications And Industries. These Products Are Made From Polyester, Nylon ,cotton, canvas and leather, or any other material, as per the customer’s needs. Bags are available with or without tools. Most of our standard bags are made out of water proof Nylon material, and suitable for rouge handling. The designing of these bags are done with the convenience of use and durability, in mind. Bags can be supplied by us, as per customer’s design, on request.

Model No. Voltage 50/60 Hz Weight Approx.(kg.) SWP-110 110V 7.5 SWP-230 230V 7.5 Tube expansion job is very critical and important process in manufacturing Heat Exchangers, Condensers and coolers, which plays vital role in the performance of the equipment. Being one of the final stage applications, over expansion as well as under expansion will lead to the rejection of equipment, thus resulting into loss of valuable man hours and material cost. SAPSONS Wattage Based Fully Automatic digital display Micro controller based Torque control Panel is designed to achieve the expansion within the acceptable parameter, at ease. It ensures the uniform drive power, irrespective of any voltage fluctuations, and transfers the same torque value to the tube expander, in every cycle and expands all the tubes equally. Features : Ø Our Digital Wattage based Torque Controller is Solid state Design without any loose parts, thus noiseless and long life. Ø User friendly Design with latest micro controller chip and One Single main circuit board for easy maintenance. Ø Protection from auto start of drive, in case of power failure, to ensure the safety of operator. Ø Digital torque settings calibrated very accurately (Resolution 1 watt ) for precise torque setting and repetitive uniform expansion. Ø Unique slow start feature enables the long life of carbon brush and the electric drive. Ø Auto recognition of Connected drive thru LED display in the panel and respective wattage range is programmed automatically , to avoid over loading. Ø Setting wattage , drive current, line voltage and drive actual wattage or either displayed or can be seen thru manual press button. Ø Trip , reverse and pause time can be adjusted as per requirement, and emergency manual reverse thru push button. Ø Options for Operation of Drive is available thru Foot or Hand . Ø Both Single cycle mode ( Forward , trip & reverse ) and Auto repeat mode ( Forward , Trip, Reverse with pre-set time, Pause with pre-set time and again repeating the cycle ) is available for the convenience of Tube expansion. Ø Physical operative condition of the drive can be seen thru LED indicators. ( i.e.. forward, reverse and trip) Ø In-built Short circuit protection and Miniature Circuit Breaker (MCB) provides the protection of both Panel and drive against voltage fluctuation or short circuits. Ø Very easy to replace the main PCB by any one. Ø Designed to work between 180 to 270 volts. Ø In-built design to protect the drive from overloading ( Drawing more current). Ø Automatic digital display warning in case of tripping . Ø User friendly design to replace the spares instantly, to minimise the downtime.

FEATURES & APPLICATIONS : • Used to cut conductors up to 40 MM DIA • Operation similar to a hydraulic jack • Knob-handle is turned to enable lineman to operate pump handle • When cut is completed, knob is turned in opposite direction to allow cutting head to open • Epoxiglass pole, handle and hydraulic hose have been tested upto 700 bar working pressure. • Hydraulic oil grade 68 is used in Hand pump. • Hose has a minimum burst strength of 15,000 PSI • Features include jaws designed to cut without flattening conductor. • Jaws are made out of special alloy steel for long and trouble free application • Well balanced, requiring minimum effort to cut large conductors.

SAPSONS make HP Series Slim type Hand operated Hydraulic crimping tool with built-in hydraulic pump, is one of the unique tool for crimping both aluminium and copper lugs and ferrules. These Crimping Tools are light in weight, easy to use and easy to carry. The HP Series Hand Crimping Tools are supplied in specially melded plastic carrying case, with hex dies of size from 10 to 300 sq.mm. The HP Series Hand Crimping Tools are very useful for electrical maintenance engineers and contractors, as they are very handy and easy to carry anywhere. * MODEL NO. SAP-HP-300

Hydraulic tube pullers can be used for both continuous tube pulling as well as stub pulling. Consists of - Hydraulic power pack - Pulling gun - Hose and other consumable accessories. Salient Features - Removes tubes without any damage to tube sheet - Interchangeable pulling gun with the same power pack - Compact design of pulling gun and power pack - Available for continuous pulling of up to 3" OD, and stub pulling of up to 4" OD - Saves time and money Tube Size: 3/8" - 3" (9.5 - 75 mm) OD for continuous pulling

SAPSONS SWR series tube wall reducers are used to reduce the wall thickness of heavy gauge tubes and weaken the tube joints, eventually helping remove tubes easily. Tube Size: 3/8" - 4" (9.5 - 101.6 mm) OD

Sapsons SKT series knockout tools are used to punch tubes/tube stubs out of tube sheets. They're used manually or with pneumatic chipping hammer (either directly or after the collapse of tube-ends). Tube Size: 3/8"- 4"(9.5 - 101.6 mm) OD

Sapsons SCT series collapsing tools are used to collapse the tube-ends, and to drive out the collapsed tube from the tube sheet. Tube Size: 3/8" - 2.1/2" (9.5 - 63.5 mm) OD

Sapsons tube plugs are designed for uniform plugging of damaged tubes to prevent leakage in heat exchangers, condensers, boilers etc. without damaging the tube sheet. They're available in a pin-type or a ring-and-pin-type design. Material: Stainless steel, carbon steel, brass, fiber etc. Sizes: 3/8" to 1.1/2" (9.5 - 38.10 mm) OD

Under Hand Crimping Tools, put text : PL series: Fitted with jaws, Sapsons hand-operated plier-type PL series crimping tools are designed to have better metal-to-metal contact between wires and non-insulated cable terminal ends. Size: 0.5 sq. mm to 16.0 sq. mm GD series: Sapsons GD series bench-type hand crimping tool is suitable for bench-mounted crimping and production line applications. Size: 10 sq. mm to 185 sq. mm GP series: Sapsons GP series mechanical gear-powered hand-operated crimping tool is a multi-stroke tool with ratchet & pin lock, and a rapid motion with maximum handle opening of 90°. This lightweight yet sturdy tool comes with interchangeable hex-type dies and is incredibly handy for carrying out tasks in a remote setting. Size: 25 sq. mm to 400 sq. mm

Under Tube-End Facing / Chamfering Machines, replace text with: Sapsons SFM series tube end facing / chamfering machines are powerful yet portable machines designed to self-align and mount on tubes for fast tube-end facing and chamfering in constrained spaces. These are ideal for trimming condenser, chiller, and heat exchanger tubes to a specific tube projection after expansion. Salient Features - Light, portable, modular and ergonomic design - User-friendly experience due to quick interchangeability of pilot - Range of tool bits available for tube-end facing, bevelling (internal and external) and weld seam machining - Available in electric, hydraulic and pneumatic drives - Saves money and inventory space, owing to a wide tube size range covered by a single machine Tube Size: 1½" - 7" (38.1 - 177.8 mm) OD