Sliding T - Handle is used for driving of manually operated sockets. It has a large leverage handle which allows application of force comfortably. The final tightening can be done with both hands. The sliding T-head is provided with a ball to arrest movement of handle at any desired position. Available in 1/4", 3/8", 1/2", 3/4", 1" and 1.1/2 " Square Drives.

8012 Series is the adjustable type tube expanders with thrust bearing collar, to be used in normal and heavy thickness tubes of Boilers, Air Heaters, Refinery Tubes, It can be used for expanding thick tube sheets of up to 8” standard expanders available for 1.3/4” to 5” OD Tubes. Available for bigger tube sizes on request. For tubes of I.D. : 1.420" (36.1mm) to 2.902" (73.7mm). Available in Roller Lengths of 2.1/4" (57.1mm) and 2.902" (73.7mm) To cover Tube Expansion Length 1/2" (12.7mm) to 4" (101.6mm).

1300 Series is the long reach expander used for higher thickness tube sheets, where expansion lengths is longer. Used for oil Coolers , Radiators & other equipment, where small diameter tubes are used. Suitable for Tube sizes ¼” to 3/8” OD. For Tubes of I.D. : 0.231" (5.8mm) to 0.331" (8.4mm). Available in Roller Lengths of 3/4" (19.05mm) and 1.14" (31.75mm) for Tube Expansion Length 3/4" (19.05mm) to 3.1/2" (88.9mm)

SAPSONS Stud Tighteners also known as Stud Drivers is used for speedier tightening of threaded studs with the help of an impact wrench. This is ideal for use in the assembly and maintenance of engines. The range covers stud diameters M5 to M36 (metric) & 1/4" (6.35mm) to 1.1/2" (38.1) UNF/BSF (SAE/BRITISH) in 3/8" to 1" square drives. The tool has a cross hole and groove for locking pin and ring arrangement. Stud Tighteners to suit BSW, BSF, UNC OR UNF Threaded studs also available on request. Extra long Deep Stud tighteners also can be supplied on request. FEATURES: Offered in various ranges from 3/8" to 1" Sq.Drive Sizes from M-5 to M-42 1/4" to1.1/2" in UNC/UNF/BSF/BSW

SAPSONS Ratchet Handles that have mechanism to suit both right- and left-hand operation. Manufactured with both 'V' teeth and square teeth, and available in open and closed body design, these Ratchet handles are designed to withstand high torque. It is available in 1/4″ (6.35 mm), 3/8″ (9.5 mm), 1/2″ (12.7 mm), 3/4″ (19 mm) and 1″ (25.4 mm) square drives of both Male and Female Drive. We also make Special and Bigger sizes as per our customer requirements for both Female Square and Hex Drive.” Female Hex drive can be supplied up to 75 mm (3” ) A/F… Also available in any special shape, (Triangle ,Bi-Hex, torx etc.. ) to meet our customer requirement.

Model No. Voltage 50/60 Hz Weight Approx.(kg.) SWP-110 110V 7.5 SWP-230 230V 7.5 Tube expansion job is very critical and important process in manufacturing Heat Exchangers, Condensers and coolers, which plays vital role in the performance of the equipment. Being one of the final stage applications, over expansion as well as under expansion will lead to the rejection of equipment, thus resulting into loss of valuable man hours and material cost. SAPSONS Wattage Based Fully Automatic digital display Micro controller based Torque control Panel is designed to achieve the expansion within the acceptable parameter, at ease. It ensures the uniform drive power, irrespective of any voltage fluctuations, and transfers the same torque value to the tube expander, in every cycle and expands all the tubes equally. Features : Ø Our Digital Wattage based Torque Controller is Solid state Design without any loose parts, thus noiseless and long life. Ø User friendly Design with latest micro controller chip and One Single main circuit board for easy maintenance. Ø Protection from auto start of drive, in case of power failure, to ensure the safety of operator. Ø Digital torque settings calibrated very accurately (Resolution 1 watt ) for precise torque setting and repetitive uniform expansion. Ø Unique slow start feature enables the long life of carbon brush and the electric drive. Ø Auto recognition of Connected drive thru LED display in the panel and respective wattage range is programmed automatically , to avoid over loading. Ø Setting wattage , drive current, line voltage and drive actual wattage or either displayed or can be seen thru manual press button. Ø Trip , reverse and pause time can be adjusted as per requirement, and emergency manual reverse thru push button. Ø Options for Operation of Drive is available thru Foot or Hand . Ø Both Single cycle mode ( Forward , trip & reverse ) and Auto repeat mode ( Forward , Trip, Reverse with pre-set time, Pause with pre-set time and again repeating the cycle ) is available for the convenience of Tube expansion. Ø Physical operative condition of the drive can be seen thru LED indicators. ( i.e.. forward, reverse and trip) Ø In-built Short circuit protection and Miniature Circuit Breaker (MCB) provides the protection of both Panel and drive against voltage fluctuation or short circuits. Ø Very easy to replace the main PCB by any one. Ø Designed to work between 180 to 270 volts. Ø In-built design to protect the drive from overloading ( Drawing more current). Ø Automatic digital display warning in case of tripping . Ø User friendly design to replace the spares instantly, to minimise the downtime.

Sapsons SKT series knockout tools are used to punch tubes/tube stubs out of tube sheets. They're used manually or with pneumatic chipping hammer (either directly or after the collapse of tube-ends). Tube Size: 3/8"- 4"(9.5 - 101.6 mm) OD

Tube Collapsing Tools are specialized mechanical devices used primarily in manufacturing, maintenance, and decommissioning processes to intentionally deform or crush tubing. The goal is to collapse the tube structure, making it unusable for further operation or ensuring it is securely sealed or destroyed. These tools are common in industries such as nuclear power, petrochemical, heat exchanger manufacturing, and aerospace. Tube Size: 3/8' - 2.1/2' (9.5 - 63.5 mm) OD

Under Tube-End Facing / Chamfering Machines, replace text with: Sapsons SFM series tube end facing / chamfering machines are powerful yet portable machines designed to self-align and mount on tubes for fast tube-end facing and chamfering in constrained spaces. These are ideal for trimming condenser, chiller, and heat exchanger tubes to a specific tube projection after expansion. Salient Features - Light, portable, modular and ergonomic design - User-friendly experience due to quick interchangability of pilot - Range of tool bits available for tube-end facing, bevelling (internal and external) and weld seam machining - Available in electric, hydraulic and pneumatic drives - Saves money and inventory space, owing to a wide tube size range covered by a single machine Tube Size: 1½" - 7" (38.1 - 177.8 mm) OD