Model No. Voltage 50/60 Hz Weight Approx.(kg.) SWP-110 110V 7.5 SWP-230 230V 7.5 Tube expansion job is very critical and important process in manufacturing Heat Exchangers, Condensers and coolers, which plays vital role in the performance of the equipment. Being one of the final stage applications, over expansion as well as under expansion will lead to the rejection of equipment, thus resulting into loss of valuable man hours and material cost. SAPSONS Wattage Based Fully Automatic digital display Micro controller based Torque control Panel is designed to achieve the expansion within the acceptable parameter, at ease. It ensures the uniform drive power, irrespective of any voltage fluctuations, and transfers the same torque value to the tube expander, in every cycle and expands all the tubes equally. Features : Ø Our Digital Wattage based Torque Controller is Solid state Design without any loose parts, thus noiseless and long life. Ø User friendly Design with latest micro controller chip and One Single main circuit board for easy maintenance. Ø Protection from auto start of drive, in case of power failure, to ensure the safety of operator. Ø Digital torque settings calibrated very accurately (Resolution 1 watt ) for precise torque setting and repetitive uniform expansion. Ø Unique slow start feature enables the long life of carbon brush and the electric drive. Ø Auto recognition of Connected drive thru LED display in the panel and respective wattage range is programmed automatically , to avoid over loading. Ø Setting wattage , drive current, line voltage and drive actual wattage or either displayed or can be seen thru manual press button. Ø Trip , reverse and pause time can be adjusted as per requirement, and emergency manual reverse thru push button. Ø Options for Operation of Drive is available thru Foot or Hand . Ø Both Single cycle mode ( Forward , trip & reverse ) and Auto repeat mode ( Forward , Trip, Reverse with pre-set time, Pause with pre-set time and again repeating the cycle ) is available for the convenience of Tube expansion. Ø Physical operative condition of the drive can be seen thru LED indicators. ( i.e.. forward, reverse and trip) Ø In-built Short circuit protection and Miniature Circuit Breaker (MCB) provides the protection of both Panel and drive against voltage fluctuation or short circuits. Ø Very easy to replace the main PCB by any one. Ø Designed to work between 180 to 270 volts. Ø In-built design to protect the drive from overloading ( Drawing more current). Ø Automatic digital display warning in case of tripping . Ø User friendly design to replace the spares instantly, to minimise the downtime.

Electronic Torque produced by SAPSONS Electric Tube Expansion Drive Unit is governed by a separate Electronic Control Panel which is adjusted by a simple Digital Display. When the Electrically Driven Motors reaches the desired Torque, the Control Unit Mechanism automatically shuts off the Power and on pressing the Reverse Button the Tube Expander retracts out from the Tube .The fully Automatic system ensures the Tubes are rolled to maximum tightness without inducing excessive cold worked stress in Tube Metal, injuring Tube ends or distorting Tube Sheet Ligaments. * SM-0 * SM-2 * SM-3 * SM-1

SAPSONS hydraulic hand pumps are suitable for various applications, like lifting, pressing, crimping ,jacking, and all other general applications. SAPSONS Heavy duty Hydraulic Hand Pumps are available up to 700 bar max. working pressure both in Single & Two Speed. Types: 1. Portable Hand Pumps– Single And Two Speed Compact Hydraulic Pumps, Very Useful Where Performance With Portability Is Preferred. 2. Heavy Duty Hand Pumps – Two Speed Pumps –With Auto Change Over From High Discharge At Low Pressure To Low Discharge At High Pressure. Once The Equipment Reaches The Load ,The Pump Automatically Change Over To High Pressure. 3. High Flow Hydraulic Hand Pumps – Heavy Duty Hand Pumps With Bigger Oil Capacity , Suitable For Double Acting Cylinders And Other Equipment. Specialities: * Easy, Effortless To Handle * Corrosion Resistant * Robust Construction * Reasonable Price.

Sapsons air to water intensifier/hydro pneumatic reciprocating pumps are an efficient, low cost alternative to motorised and hand-operated pumps. Salient Features: - Compact & lightweight, and can be mounted in any orientation - Low air consumption when used in conjunction with a low pressure, high discharge centrifugal prefill pump and hence, the energy consumption and time for building desired pressure is very low (There is no further consumption of compressed air once the pressure has built up) - Automatic leakage compensation to maintain set pressure - Pneumatically actuated components allow for usage even in explosive environments - Designed for use with water and other non-corrosive liquids as all parts that are in contact with the liquid are made from stainless steel and brass - Suction port can be rotated 360° for easy installation, and non-return valve assembly can be easily dismantled for quick servicing Applications - Hydrostatic pressure testing of castings, valves, hoses, pressure vessels etc. - Cyclic pressure or life testing of pressure guages, pressure switches, hoses etc. - Burst strength testing of pressured vessels such as LPG/nitrogen/oxygen gas cylinders, storage tanks, hoses, pipes etc. - Seat leakage test of control valves - Operation of single acting hydraulic cylinders used in hydraulic clamps, lifting platforms, compression moulding presses etc. - Isotactic pressing of powder metals and ceramics - Transferring of liquids from barrels, storage tanks etc. - Pumping oil/grease in centralised lubrication systems"

SAPSONS Automatic Grooving Tool besides Catering to various applications for Internal Grooving is specially designed for Matching Grooves in Tube Sheet Holes to aid in Locking Rolled Tubes into Position during Tube Expansion. It incorporates the Proven and accepted Principle of an eccentric Tool Holder turning on its own Axis. As the Tool moves into the work piece/ Tube Sheet, the Pilot nose contacts the face of the work piece/ Tube Sheet, the cutter is now in the position to cut. Continued movement of the Tool starts the feed stroke which actuates the cutter and feeds it readily into the work. The location of cut is controlled by a quick lock Adjustable Collar, the depth of cut is also controlled by a Quick Lock-Stop Nut, which permits simple, fast and accurate adjustments. Features: 1. Accurate and Quick 2. Covers wide range of bores by simply changing cutters & pilot nose 3. User friendly easy to adjust length & depth of cut 4. Automatic two in one design 5. Form cutter and tool bit with different groove configuration can be supplied

SAPSONS manufacturers complete range of Transmission Line Tools . Our Hydraulic stringing (Compression ) machine available with both hand operated and power operated pumps. These tools are specially designed to work perfectly on all sizes of AAA, AAAC, ACSR conductors (namely Panther, Moose, Dog and Zebra, etc.) of EHV transmission lines. The crimping blocks (dies) of the Compressor Machines are made out of special alloy steel, heat-treated and chrome plated for best result out of it. Used for Mid-Span joints and dead-end joints, our tool ensures the same mechanical strength and electrical conductivity that of solid conductors. The compressor machines are available in both Single & Double pump model. List of Sapsons Transmission Line Tools: 1. Hydraulic Stringing Tool – Manual / Petrol / Electric Operated 2. Hydraulic Operated ACSR Conductor Cutter 3. Drum Lifting Jacks – 3, 6 And 10 Tons 4. Turn Table 5. Turn Buckle 6. Sagging Winch 7. Power Winch 8. Industrial Rope Pulley 9. Bolted Type Come Along Clamp – 4 & 7 Bolts & Automatic 10. Aerial Roller – 300, 400, 600 And 800 Mm

Spring Balancers - are most scientifically designed for suspending and balancing the object , at required height. Working on the principle of Coiled spring, it ensures constant tension throughout the entire cable travel, to ensure fatigueless operation. Manufactured from High grade Aluminium casting, it is compact in design and light in weight. With Forged swivel top hook for 360 deg. Rotation, it has built-in safety locking mechanism, to prevent any unforeseen accident, due to spring failure. Salient Features: - Specially designed to free the operator from the weight of hand tools, thereby reducing operator fatigue. - Allows easy handling, as the weight of the loaded balancers and pressure required for operation is counter balanced in the containerized (main) spring mechanism of the spring balancers itself. - Provides maximum impact resistance due to the rugged construction of spring balancer (as main housing and cover plate are manufactured from high tensile lightweight aluminium alloy. - Ensures maximum safety due to forged steel upper support hook and bottom suspension hook assemblies. - Good flexibility and fall safety as a result of cables made using standard flexible wire rope . - Unique, tapered cable drum design that matches the middle turns of spring balancers where the optimum torque build-up is constant; provides smooth and even cable tensions throughout the entire cable travel length. - Easily accessible external tension adjustment, using which required tension can be set through a hardened worm form gear system; no special tool required. - Swivel on top hook allows 360° rotation positioning the spring balancers for easiest cable flow; prolongs cable life. - Automatic Drum Lock arrangement to prevent the load from falling in case spring balancer lowers sharply. - Suspended tools can be easily engaged or disengaged using the manual drum lock, making changeover safe, simple and quick; reduces downtime. Applications : Portable Hand Tools, Welder Guns, Spray guns, Short Blast Guns, Drifting Attachments in mines and Quarries, Jute and synthetic bag closing machines, Gauges, Jigs and Fixtures, Pendant Station, Switch Button of Hoists, in case of de-oxidation, water washing of plating work with raising and lowering of work etc. Design : Overhead Spring Balancers are specially designed to free the operator from weight of the hand tools or any other object, which is handled by human, for hours, continuously. When properly balanced by adjusting spring tension, the tools become almost weightless in the hands of the operator and can be moved up and down with very little effort. Advantages: 1. Increases Productivity – Balancers Keep Poised For Action, Minimize Motions Required To Bring Tool From Rest To Work Positions. 2. Extends Tool Life - Balancers Eliminate Pick-Up And Lay Down Wear And Prevent Damage From Dropping. 3. Reduces Operator Fatigue – A Balancer Makes The Heaviest Tool Light As A Feather. Operator Effort Can Be Directed To Controlling The Tool Rather Than Supporting. 4. No Need Of Power – There Is No Need Of Electrical Or Mechanical Power. 5. Increases Safety – Balancers Keep Work Area Uncluttered To Reduce Chances Of Damages Of Accessories Or Accidental Start-Up Of Tools During Handling. 6. Effective Use Of Space – The Working Place Being Widely Utilized, And Also To Be Cleaned Up, The Production Is Smoothly Carried Out.