'life testing'

SAPSONS Hydraulic Hoses manufactured from premium quality raw material, for better quality and longer life. Specially designed with high Testing and bursting ratio, our Hydraulic Hoses, available up to 15000 PSI (1000 Bar). Our SAPSONS Heavy Duty Hydraulic Hoses are available in 4, 6, 10 mtrs long with end connectors, suitable for all SAPSONS Make Crimping tools. Hoses with longer length also can be supplied on request. Heavy duty Hydraulic hoses available in all sizes and for various applications. Salient Features: - High burst test ratio, which makes it safer for operators - Sturdy construction - Resistance against corrosion - High tensile strength - Good value for money - Can be supplied with pressure ratings up to 15000 PSI (1000 Bar)"

Sapsons air to water intensifier/hydro pneumatic reciprocating pumps are an efficient, low cost alternative to motorised and hand-operated pumps. Salient Features: - Compact & lightweight, and can be mounted in any orientation - Low air consumption when used in conjunction with a low pressure, high discharge centrifugal prefill pump and hence, the energy consumption and time for building desired pressure is very low (There is no further consumption of compressed air once the pressure has built up) - Automatic leakage compensation to maintain set pressure - Pneumatically actuated components allow for usage even in explosive environments - Designed for use with water and other non-corrosive liquids as all parts that are in contact with the liquid are made from stainless steel and brass - Suction port can be rotated 360° for easy installation, and non-return valve assembly can be easily dismantled for quick servicing Applications - Hydrostatic pressure testing of castings, valves, hoses, pressure vessels etc. - Cyclic pressure or life testing of pressure guages, pressure switches, hoses etc. - Burst strength testing of pressured vessels such as LPG/nitrogen/oxygen gas cylinders, storage tanks, hoses, pipes etc. - Seat leakage test of control valves - Operation of single acting hydraulic cylinders used in hydraulic clamps, lifting platforms, compression moulding presses etc. - Isotactic pressing of powder metals and ceramics - Transferring of liquids from barrels, storage tanks etc. - Pumping oil/grease in centralised lubrication systems"

Torque wrench is one of the very important tool, which is basically precision instrument, on which the quality of our job/ product depends. SAPSONS torque wrenches are manufactured , keeping this basic requirement in mind, and we take special care and precautions, from manufacturing to final testing and acceptance of the same, to ensure that there is no compromise to its quality and reliability. SAPSONS Adjustable / Preset click type Torque Wrenches are compact in design. Critical parts are made out of forged steel for long life and calibrated to an accuracy of + 3%. Available from 2.5 to 2700 NM Torque Capacity covered in 12 models with built in Ratchet Mechanism and Non - Ratchet Mechanism. Available in three different types as follows , depending upon the application, all supplied with + 3% accuracy : 1. Adjustable Click type torque wrench without Ratchet mechanism - where only final tightening is done with Torque wrench. 2. Adjustable Click type torque wrench with in-built Ratchet mechanism - where from initial to final tightening is done with Torque wrench, and for high productivity. 3. Fixed type torque wrench with or without Ratchet mechanism - where only pre-set torque is applied, repeatedly. TORQUE WRENCHES CAN BE SELECTED BASED ON THE REQUIRED TORQUE TO BE APPLIED, FROM OUR BELOW CHART... APPLICATIONS : Power Plants, Refineries, Petrochemicals, Fertilizers, Heavy Engineering Industries, Shipyards and Ship Building, Aeronautics and Automobiles. Features of 'SAPSONS' Torque Wrenches: * Sturdy And Robust Design * Guaranteed Accuracy Of ± 3% * Compact Design Facilitate Usage In Confined Areas. * Ensures Correct Torque By Click Sound, Vision And Operator Feeling * Calibrated By Electronic Calibrators To Close Tolerance, Which Are Certified By NPL. * very Torque Wrench Is Supplied With The Calibration Certificate.

SAPSONS HYDRAULIC CABLE SPIKING TOOL is specially designed to ensure the absence of voltage in low voltage and Medium voltage power cables before undertaking any electrical maintenance work. Human life is precious and by using our Cable spiking tool, the safety of the Electrical team is ensured. They can simply check the Power cable and eliminate accident. What is cable Spiking tools? Cable Spiking tool is one of the Safety tools used to protect the Electrical workers from any Electrical accident while carrying out cable repair, maintenance, jointing or end termination etc... The cable spiking chisel pierces the sheath of the cable, as well as its insulation, to reach the main conductor. If the cable is powered prior to cutting, an arcing fault is caused by breaking down the insulation. Why are spike tool used? Cable spiking tool is used to ensure that the power cable under maintenance is not live. Cables are spiked with the help of Cable spiking tool and confirm the circuit is not Live. It is one of the very important safety procedure universally followed and the Cables are preliminarily spiked before carrying out jointing or terminating of faulty 11kV/33kV cables. Our Cable spiking tool is intended to prove that any power cable under maintenance is previously disconnected, is dead before starting the work, when these cables are undergoing repair, diversion or maintenance. The design of SAPSONS cable spiking tool is robust and reliable which consist of a hand operated hydraulic pump connected by a hydraulic hose to the hydraulic cylinder. The Cable Spiking chisel which is made of special alloy steel and hardened is connected to the piston of the Hydraulic cylinder. When the cylinder is operated thru the Hydraulic hand pump, the chisel pierce into the cable to reach the conductor. The Cylinder is mounted on a Rectangular shaped tubular steel body which is placed on cable dia and locked with the lower base clamp by threaded steel rods on both the side. A separate earthing cable of approx. 6 mtrs. long crimped at one end with suitable lugs connected with the tool and the other end is having the earthing rod for grounding.

Model No. Voltage 50/60 Hz Weight Approx.(kg.) SWP-110 110V 7.5 SWP-230 230V 7.5 Tube expansion job is very critical and important process in manufacturing Heat Exchangers, Condensers and coolers, which plays vital role in the performance of the equipment. Being one of the final stage applications, over expansion as well as under expansion will lead to the rejection of equipment, thus resulting into loss of valuable man hours and material cost. SAPSONS Wattage Based Fully Automatic digital display Micro controller based Torque control Panel is designed to achieve the expansion within the acceptable parameter, at ease. It ensures the uniform drive power, irrespective of any voltage fluctuations, and transfers the same torque value to the tube expander, in every cycle and expands all the tubes equally. Features : Ø Our Digital Wattage based Torque Controller is Solid state Design without any loose parts, thus noiseless and long life. Ø User friendly Design with latest micro controller chip and One Single main circuit board for easy maintenance. Ø Protection from auto start of drive, in case of power failure, to ensure the safety of operator. Ø Digital torque settings calibrated very accurately (Resolution 1 watt ) for precise torque setting and repetitive uniform expansion. Ø Unique slow start feature enables the long life of carbon brush and the electric drive. Ø Auto recognition of Connected drive thru LED display in the panel and respective wattage range is programmed automatically , to avoid over loading. Ø Setting wattage , drive current, line voltage and drive actual wattage or either displayed or can be seen thru manual press button. Ø Trip , reverse and pause time can be adjusted as per requirement, and emergency manual reverse thru push button. Ø Options for Operation of Drive is available thru Foot or Hand . Ø Both Single cycle mode ( Forward , trip & reverse ) and Auto repeat mode ( Forward , Trip, Reverse with pre-set time, Pause with pre-set time and again repeating the cycle ) is available for the convenience of Tube expansion. Ø Physical operative condition of the drive can be seen thru LED indicators. ( i.e.. forward, reverse and trip) Ø In-built Short circuit protection and Miniature Circuit Breaker (MCB) provides the protection of both Panel and drive against voltage fluctuation or short circuits. Ø Very easy to replace the main PCB by any one. Ø Designed to work between 180 to 270 volts. Ø In-built design to protect the drive from overloading ( Drawing more current). Ø Automatic digital display warning in case of tripping . Ø User friendly design to replace the spares instantly, to minimise the downtime.

Effective cleaning of Tube Inner dia results into longer life and better performance of the vessels and Equipments. Tube cleaning brushes are used for soft , light scales inside the tubes. Bristles are made out of Nylon, steel and Stainless steel wires, as per customer requirements. Can be easily connect and disconnected thru threaded coupling. Available From 3/8” To 4” OD Tubes. TYPE : Condenser Brushes, Turk Head Brushes And Double Spiral Brushes, Etc.

Tool Heads is fitted to the Flexible shaft to remove scale and hard deposits from inside the tubes of Processing Equipment. Available in Fixed type with Three and Spring type with 15 Sharp revolving Cutters, it chip the scale at high speed and the resultant centrifugal force. All parts are manufactured from special Alloy steel and heat treated for longer life. For Medium Size Straight Tubes: * PAD Type Arrowhead Drill For Opening Blocked Tubes * PBT Type Boring Tool For Cleaning Semi blocked * PSL Type Spring Loaded For Hard And Obstinate Scale * PDH Type Double Head For Hard And Medium Scale * PAD/UJ Type Drill Head With Universal Joint For Thick Scale * PPA Type Pivoted Arm For Uneven Hard Scale * PSF Type Swing Frame For All Types Of Scale * PSH Type Single Head For Hard And Medium Scale * WBA Type Cup Shaped For Scouring Of Thin Hard Scale * PTH Type Turk's Head For Scouring After Descaling * PDS Type Double Spiral For Scouring Carbon Scale * PGP Type General Purpose For Debarring Polishing Etc.

Periodic cleaning of Tube Inner dia in Processing Equipment like BOILERS, Air Heaters , Evaporators and Sugar Refining vessels is very essential for its better performance and longer life. Our Flexible Shaft Machines are designed to meet customer’s expectation, with rugged construction, simple to operate, minimum maintenance and trouble free service. It is a self-contained portable unit, fitted with lifting or carrying handle. It consists of a TEFC, continuously rated, squirrel cage, 440 volts, 3 phase, 50 C/S, AC electric motor. Standard machines are available with 3, 5 & 7.5 HP and Free speed of 2880 or 1440 RPM. It is controlled by a push button starter, with features like single phase protection, overload and under voltage protection. In addition it is also ambient temperature compensated. Each machine is fully wired, carefully tested and is supplied with a 20 feet long power cable .

Salient Features: - Sturdy pillar (H frame/C frame type) - Standard or custom design that suits various needs and a wide range of applications - Superior quality electrical and hydraulic components used - Programmable logic control circuits can be provided on request - Special decompression and bumping circuits to extend service life - Structure qualifies standard acceptance tests - Designed to withstand higher overloads - Actuators/cylinders used are made of tubes & seals of international standards - Low maintenance - 2-400 ton pressing capacities - Comes with a manual for operating electrical controls Applications - Deep draw, crimping, punching, bending and straightening - Coining, compacting and sintering - Concrete paver block and tile manufacturing - Rubber moulding and Bakelite mounting and briquetting - Wax, malt coffee and juice extraction - Scrap bailing "