Effective cleaning of Tube Inner dia results into longer life and better performance of the vessels and Equipments. Tube cleaning brushes are used for soft , light scales inside the tubes. Bristles are made out of Nylon, steel and Stainless steel wires, as per customer requirements. Can be easily connect and disconnected thru threaded coupling. Available From 3/8” To 4” OD Tubes. TYPE : Condenser Brushes, Turk Head Brushes And Double Spiral Brushes, Etc.

Tool Heads is fitted to the Flexible shaft to remove scale and hard deposits from inside the tubes of Processing Equipment. Available in Fixed type with Three and Spring type with 15 Sharp revolving Cutters, it chip the scale at high speed and the resultant centrifugal force. All parts are manufactured from special Alloy steel and heat treated for longer life. For Medium Size Straight Tubes: * PAD Type Arrowhead Drill For Opening Blocked Tubes * PBT Type Boring Tool For Cleaning Semi blocked * PSL Type Spring Loaded For Hard And Obstinate Scale * PDH Type Double Head For Hard And Medium Scale * PAD/UJ Type Drill Head With Universal Joint For Thick Scale * PPA Type Pivoted Arm For Uneven Hard Scale * PSF Type Swing Frame For All Types Of Scale * PSH Type Single Head For Hard And Medium Scale * WBA Type Cup Shaped For Scouring Of Thin Hard Scale * PTH Type Turk's Head For Scouring After Descaling * PDS Type Double Spiral For Scouring Carbon Scale * PGP Type General Purpose For Debarring Polishing Etc.

Periodic cleaning of Tube Inner dia in Processing Equipment like BOILERS, Air Heaters , Evaporators and Sugar Refining vessels is very essential for its better performance and longer life. Our Flexible Shaft Machines are designed to meet customer’s expectation, with rugged construction, simple to operate, minimum maintenance and trouble free service. It is a self-contained portable unit, fitted with lifting or carrying handle. It consists of a TEFC, continuously rated, squirrel cage, 440 volts, 3 phase, 50 C/S, AC electric motor. Standard machines are available with 3, 5 & 7.5 HP and Free speed of 2880 or 1440 RPM. It is controlled by a push button starter, with features like single phase protection, overload and under voltage protection. In addition it is also ambient temperature compensated. Each machine is fully wired, carefully tested and is supplied with a 20 feet long power cable .

SAPSONS Hydraulic Hoses manufactured from premium quality raw material, for better quality and longer life. Specially designed with high Testing and bursting ratio, our Hydraulic Hoses, available up to 15000 PSI (1000 Bar). Our SAPSONS Heavy Duty Hydraulic Hoses are available in 4, 6, 10 mtrs long with end connectors, suitable for all SAPSONS Make Crimping tools. Hoses with longer length also can be supplied on request. Heavy duty Hydraulic hoses available in all sizes and for various applications. Salient Features: - High burst test ratio, which makes it safer for operators - Sturdy construction - Resistance against corrosion - High tensile strength - Good value for money - Can be supplied with pressure ratings up to 15000 PSI (1000 Bar)"

Bolt tensioners are one of the unique tool to tighten the Flanges with uniform Gasket compression through out the joint. Hydraulic bolt tensioners are best option , in compare to conventional Hydraulic torquing , particularly where the high pressure joints are concerned…It helps to achieve leak free joints, high accuracy , better productivity and improving the life of Gasket joints. SAPSONS’ bolt Tensioners are synonymous to longer life, better performance, less maintenance, and most essentially, value for money. With the latest technology seals used for less down time, SBT Series Bolt Tensioners are user-friendly and versatile in their design and operations and helps in completing the job in shorter time periods. Available for both general purpose as well as for special applications, these tools find a wide applicability in Nuclear Power Plants, Wind Mills, Gas plants, Refineries, Petrochemicals Sector, Oil rigs, Construction industries, Tunneling & Mining, Hydro Power and thermal Power plants. List of Consumable Spares: * Thread Puller * Load Cell * Bridge * Nut Driver How to Use: 1. Slide The Nut Driver Into The Nut. 2. Place The Bridge And Load Cell, Over The Stud 3. Tighten The Thread Puller Over The Stud Into Each Load Cell Until Securely In Contact With The Cylinder Piston. 4. Connect The Hydraulic Hoses To All The Tensioners, As Well To The Pump Manifold. 5. Ensure That The Hoses Are Connected Firmly At Both The Ends. 6. Apply Hydraulic Pressure To The Load Cell ,Which Actuates The Hydraulic Load Cells And Apply Even Load Across The Flange By All The Interconnected Bolt Tensioners. 7. Rotate The Nut Driver Using A Tommy Bar, Till It Touches The Flange Surface Firmly. 8. Release The Tool Pressure And The Bolt Tensioning Procedure Is Complete. 9. Repeat The Same Procedure, To Tighten The Alternative Studs… To be able to deliver a leak free bolted assembly you must apply the correct amount of compressive load to the sealing surface or gasket. Salient Features of Sapsons Bolt Tensioner: * Versatile Design: SBT Series Standard Variable Tensioners Are Designed To Provide A Wide Range Of Flexibility, Covering Stud Sizes 3/4″ To 5.3/4″. Different Stud Sizes Are Accommodated By Simply Changing Adaptor Kit Consisting Of Puller, Bridge & Nut Driver, While Utilizing The Same Load Cell. * High Strength Alloy Steel: The SBT Series Tensioner Operates At A Maximum Pressure Of 1500 Bar & Utilizes High Strength AISl 4340 Steel Parts For Long Lasting Performance. * Stroke Indicator: The SBT Series Tensioner Has An Exceptional Stroke Of 15 Mm. Integral Stroke Indicator Allows Piston Stroke To Be Viewed & Measured Indication Of Stroke Is Provisioned With Over Stroke Limit Indication. * Safe Design: The SBT Series Tensioners Are Designed So That In Event Of Over-Stroke, The High-Pressure Fluid Will Be Released From The Inner Side Of The Load Cell, & Thus Saving The Operator From Possible Exposure. * Multi-Tensioning: The SBT Series Load Cell Is Provisioned With Two Connections & This Acts As Manifold For Multi-Tensioning Applications. By Using SAPSONS High Pressure Link Hoses, Any Number Of Bolt Tensioners Can Be Connected & Tightened Simultaneously. This Ensures Equal Tightening Of All Bolts In The Assy. & Reduce The Work Time. * Anti-Roll Seals: Low Frictions, Anti-Roll Seats & Rigid Backup Rings Incorporated For Improved Life And Reliability. * Floating Piston: The Unique Piston Design Allows 2° Tilt Without Any Loss Of Load, Preventing Piston Seizure Or Damage Of Piston Bore.

SAPSONS HYDRAULIC CABLE SPIKING TOOL is specially designed to ensure the absence of voltage in low voltage and Medium voltage power cables before undertaking any electrical maintenance work. Human life is precious and by using our Cable spiking tool, the safety of the Electrical team is ensured. They can simply check the Power cable and eliminate accident. What is cable Spiking tools? Cable Spiking tool is one of the Safety tools used to protect the Electrical workers from any Electrical accident while carrying out cable repair, maintenance, jointing or end termination etc... The cable spiking chisel pierces the sheath of the cable, as well as its insulation, to reach the main conductor. If the cable is powered prior to cutting, an arcing fault is caused by breaking down the insulation. Why are spike tool used? Cable spiking tool is used to ensure that the power cable under maintenance is not live. Cables are spiked with the help of Cable spiking tool and confirm the circuit is not Live. It is one of the very important safety procedure universally followed and the Cables are preliminarily spiked before carrying out jointing or terminating of faulty 11kV/33kV cables. Our Cable spiking tool is intended to prove that any power cable under maintenance is previously disconnected, is dead before starting the work, when these cables are undergoing repair, diversion or maintenance. The design of SAPSONS cable spiking tool is robust and reliable which consist of a hand operated hydraulic pump connected by a hydraulic hose to the hydraulic cylinder. The Cable Spiking chisel which is made of special alloy steel and hardened is connected to the piston of the Hydraulic cylinder. When the cylinder is operated thru the Hydraulic hand pump, the chisel pierce into the cable to reach the conductor. The Cylinder is mounted on a Rectangular shaped tubular steel body which is placed on cable dia and locked with the lower base clamp by threaded steel rods on both the side. A separate earthing cable of approx. 6 mtrs. long crimped at one end with suitable lugs connected with the tool and the other end is having the earthing rod for grounding.

Model No. Voltage 50/60 Hz Weight Approx.(kg.) SWP-110 110V 7.5 SWP-230 230V 7.5 Tube expansion job is very critical and important process in manufacturing Heat Exchangers, Condensers and coolers, which plays vital role in the performance of the equipment. Being one of the final stage applications, over expansion as well as under expansion will lead to the rejection of equipment, thus resulting into loss of valuable man hours and material cost. SAPSONS Wattage Based Fully Automatic digital display Micro controller based Torque control Panel is designed to achieve the expansion within the acceptable parameter, at ease. It ensures the uniform drive power, irrespective of any voltage fluctuations, and transfers the same torque value to the tube expander, in every cycle and expands all the tubes equally. Features : Ø Our Digital Wattage based Torque Controller is Solid state Design without any loose parts, thus noiseless and long life. Ø User friendly Design with latest micro controller chip and One Single main circuit board for easy maintenance. Ø Protection from auto start of drive, in case of power failure, to ensure the safety of operator. Ø Digital torque settings calibrated very accurately (Resolution 1 watt ) for precise torque setting and repetitive uniform expansion. Ø Unique slow start feature enables the long life of carbon brush and the electric drive. Ø Auto recognition of Connected drive thru LED display in the panel and respective wattage range is programmed automatically , to avoid over loading. Ø Setting wattage , drive current, line voltage and drive actual wattage or either displayed or can be seen thru manual press button. Ø Trip , reverse and pause time can be adjusted as per requirement, and emergency manual reverse thru push button. Ø Options for Operation of Drive is available thru Foot or Hand . Ø Both Single cycle mode ( Forward , trip & reverse ) and Auto repeat mode ( Forward , Trip, Reverse with pre-set time, Pause with pre-set time and again repeating the cycle ) is available for the convenience of Tube expansion. Ø Physical operative condition of the drive can be seen thru LED indicators. ( i.e.. forward, reverse and trip) Ø In-built Short circuit protection and Miniature Circuit Breaker (MCB) provides the protection of both Panel and drive against voltage fluctuation or short circuits. Ø Very easy to replace the main PCB by any one. Ø Designed to work between 180 to 270 volts. Ø In-built design to protect the drive from overloading ( Drawing more current). Ø Automatic digital display warning in case of tripping . Ø User friendly design to replace the spares instantly, to minimise the downtime.

It is a Shaft consist of Inner Core ,Outer casing Motor Coupling and Hand piece. It is designed to penetrate in to the tube inner dia, flexibly even into the bend tubes, without damaging the inner surface of the tube, and capable of transmitting rotary power from the Power unit to the tool head or brush. INNER WIRE CORE is flexible shaft's most important working element. It is designed and constructed to meet power drive operating conditions that include torque, speed, length and minimum bend radius. At the centre of the core is a single wire around which successive multi-stranded layers of wires are wrapped. Each layer is wound in the opposite direction and at right angles to the layer directly beneath it. The direction in which the wire on the outer most layer is wound determines the direction in which the shaft is designed to rotate. OUTER CASTING made of galvanized steel strip and is internally reinforced with antifriction lining to support the wire core and resist the torque. Outer casing does not rotate but protect the inner core and the tube inner dia. HANDPIECE is attached to one end of the shaft, either detachable or fixed type, with threaded spindle to connect tool heads or brushes. MOTOR COUPLING is fitted to the other end of the shaft, either threaded type or shear pin type, connected to the main power unit. Available in 25mm(1”) , 32mm(1.1/4”) and 36mm(1.3/8”) OD with 12mm(1/2”),16mm (5/16”) and 19 mm(3/4”) inner core respectively, with various length of 6 to 22 mtrs. Long. Longer length is also available on request.

Salient Features: - Sturdy pillar (H frame/C frame type) - Standard or custom design that suits various needs and a wide range of applications - Superior quality electrical and hydraulic components used - Programmable logic control circuits can be provided on request - Special decompression and bumping circuits to extend service life - Structure qualifies standard acceptance tests - Designed to withstand higher overloads - Actuators/cylinders used are made of tubes & seals of international standards - Low maintenance - 2-400 ton pressing capacities - Comes with a manual for operating electrical controls Applications - Deep draw, crimping, punching, bending and straightening - Coining, compacting and sintering - Concrete paver block and tile manufacturing - Rubber moulding and Bakelite mounting and briquetting - Wax, malt coffee and juice extraction - Scrap bailing "