Tool Heads is fitted to the Flexible shaft to remove scale and hard deposits from inside the tubes of Processing Equipment. Available in Fixed type with Three and Spring type with 15 Sharp revolving Cutters, it chip the scale at high speed and the resultant centrifugal force. All parts are manufactured from special Alloy steel and heat treated for longer life. For Medium Size Straight Tubes: * PAD Type Arrowhead Drill For Opening Blocked Tubes * PBT Type Boring Tool For Cleaning Semi blocked * PSL Type Spring Loaded For Hard And Obstinate Scale * PDH Type Double Head For Hard And Medium Scale * PAD/UJ Type Drill Head With Universal Joint For Thick Scale * PPA Type Pivoted Arm For Uneven Hard Scale * PSF Type Swing Frame For All Types Of Scale * PSH Type Single Head For Hard And Medium Scale * WBA Type Cup Shaped For Scouring Of Thin Hard Scale * PTH Type Turk's Head For Scouring After Descaling * PDS Type Double Spiral For Scouring Carbon Scale * PGP Type General Purpose For Debarring Polishing Etc.

Hydraulic tube pullers can be used for both continuous tube pulling as well as stub pulling. Consists of - Hydraulic power pack - Pulling gun - Hose and other consumable accessories. Salient Features - Removes tubes without any damage to tube sheet - Interchangeable pulling gun with the same power pack - Compact design of pulling gun and power pack - Available for continuous pulling of up to 3" OD, and stub pulling of up to 4" OD - Saves time and money Tube Size: 3/8" - 3" (9.5 - 75 mm) OD for continuous pulling

Tube Wall Reducers are specialized tools used in metal forming, pipe manufacturing, and fabrication to reduce the wall thickness of tubes or pipes without changing their outer diameter significantly. These tools are essential in applications requiring precise material thickness for structural, fluid transport, or pressure-based functions. Tube Size: 3/8' - 4' (9.5 - 101.6 mm) OD

Sapsons SKT series knockout tools are used to punch tubes/tube stubs out of tube sheets. They're used manually or with pneumatic chipping hammer (either directly or after the collapse of tube-ends). Tube Size: 3/8"- 4"(9.5 - 101.6 mm) OD

Tube Plug are specialized tools used primarily in industries such as power generation, petrochemical, and HVAC for the installation or removal of tube plugs in heat exchangers, condensers, boilers, or chillers. Tube plugs are used to seal off damaged or leaking tubes to prevent system contamination or performance degradation. Sizes: 3/8' to 1.1/2' (9.5 - 38.10 mm) OD

Under Tube-End Facing / Chamfering Machines, replace text with: Sapsons SFM series tube end facing / chamfering machines are powerful yet portable machines designed to self-align and mount on tubes for fast tube-end facing and chamfering in constrained spaces. These are ideal for trimming condenser, chiller, and heat exchanger tubes to a specific tube projection after expansion. Salient Features - Light, portable, modular and ergonomic design - User-friendly experience due to quick interchangability of pilot - Range of tool bits available for tube-end facing, bevelling (internal and external) and weld seam machining - Available in electric, hydraulic and pneumatic drives - Saves money and inventory space, owing to a wide tube size range covered by a single machine Tube Size: 1½" - 7" (38.1 - 177.8 mm) OD

Condenser Tube Cleaner Kit is Pneumatic operated system, designed to clean straight tubes in Heat Exchangers, condensers, coolers, chillers etc. These equipment contain many small diameter tubes which vary from 3/8" to 1.1/4" in diameter and six to twenty feet or even more in length. Consists of Portable Pneumatic Drive, Water Flushing Attachment, Set Of Hollow Shafts and Couplings, Cleaning Heads Like Drill, Cutter and Brush along with air and Water Hoses, all supplied in suitable steel carrying case. The suitable cleaning head according to the tube ID, is connected thru thread in to the hollow shafts , which is again connected to the Pneumatic drive, and inserted into the tube. Number of shafts are connected thru couplings to increase the length , to cover the entire length of the tube, to be cleaned. A water flushing system is also attached to the drive to flush out the loose deposits out of the tube as well to keep the tool head cool. The Pneumatic drive runs at a speed of about 700 RPM , along with the water flow, and the tool head breaks the scale, while the water loosens the deposits. Very Handy and user friendly, this equipment is very useful to those Industries, where periodical cleaning of tubes are mandatory.

Flaring of projected tube ends, after Expansion ensures better grip of the tube with the Tube sheet. It can be used either manually or with Pneumatic Chipping Hammer. Made out of Special Alloy and heat treated , to withstand the impact load, while using. Handle portion is knurled for better grip. Available For Any Tube Size Between ½” To 1.1/2” OD Tubes

Inserting the tubes in to the Tube sheet and Baffle plates is one of the very important activity , in manufacturing of Heat Exchangers, Condensers , Chiller etc., during which the tube ends often get damaged, result into the rejection of complete tubes , most of the time, particularly in Non-Ferrous tubes. Our Tube Guides are designed to protect the tube ends and simplifying the tube insertion process. The Conical shape of the nose allows the Tube end to self align it to the holes in the baffles plates and the tube sheet. Made out of Aluminium nose with Nylon bristle tails, which hold the Guide into the tube ID ., firmly, while insertion. It can be re-used. Sizes Available For ½” To 2.1/2” OD Tubes.