Sapsons air to water intensifier/hydro pneumatic reciprocating pumps are an efficient, low cost alternative to motorised and hand-operated pumps. Salient Features: - Compact & lightweight, and can be mounted in any orientation - Low air consumption when used in conjunction with a low pressure, high discharge centrifugal prefill pump and hence, the energy consumption and time for building desired pressure is very low (There is no further consumption of compressed air once the pressure has built up) - Automatic leakage compensation to maintain set pressure - Pneumatically actuated components allow for usage even in explosive environments - Designed for use with water and other non-corrosive liquids as all parts that are in contact with the liquid are made from stainless steel and brass - Suction port can be rotated 360° for easy installation, and non-return valve assembly can be easily dismantled for quick servicing Applications - Hydrostatic pressure testing of castings, valves, hoses, pressure vessels etc. - Cyclic pressure or life testing of pressure guages, pressure switches, hoses etc. - Burst strength testing of pressured vessels such as LPG/nitrogen/oxygen gas cylinders, storage tanks, hoses, pipes etc. - Seat leakage test of control valves - Operation of single acting hydraulic cylinders used in hydraulic clamps, lifting platforms, compression moulding presses etc. - Isotactic pressing of powder metals and ceramics - Transferring of liquids from barrels, storage tanks etc. - Pumping oil/grease in centralised lubrication systems"

A belt sander is a power tool that uses a loop of sandpaper on rotating drums to quickly smooth or shape wood, metal, or other surfaces. It comes in handheld or stationary types and is commonly used in woodworking and DIY projects. It's fast and powerful, ideal for large, flat areas, but requires careful handling for best results and safety.

SAPSONS HYDRAULIC CABLE SPIKING TOOL is specially designed to ensure the absence of voltage in low voltage and Medium voltage power cables before undertaking any electrical maintenance work. Human life is precious and by using our Cable spiking tool, the safety of the Electrical team is ensured. They can simply check the Power cable and eliminate accident. What is cable Spiking tools? Cable Spiking tool is one of the Safety tools used to protect the Electrical workers from any Electrical accident while carrying out cable repair, maintenance, jointing or end termination etc... The cable spiking chisel pierces the sheath of the cable, as well as its insulation, to reach the main conductor. If the cable is powered prior to cutting, an arcing fault is caused by breaking down the insulation. Why are spike tool used? Cable spiking tool is used to ensure that the power cable under maintenance is not live. Cables are spiked with the help of Cable spiking tool and confirm the circuit is not Live. It is one of the very important safety procedure universally followed and the Cables are preliminarily spiked before carrying out jointing or terminating of faulty 11kV/33kV cables. Our Cable spiking tool is intended to prove that any power cable under maintenance is previously disconnected, is dead before starting the work, when these cables are undergoing repair, diversion or maintenance. The design of SAPSONS cable spiking tool is robust and reliable which consist of a hand operated hydraulic pump connected by a hydraulic hose to the hydraulic cylinder. The Cable Spiking chisel which is made of special alloy steel and hardened is connected to the piston of the Hydraulic cylinder. When the cylinder is operated thru the Hydraulic hand pump, the chisel pierce into the cable to reach the conductor. The Cylinder is mounted on a Rectangular shaped tubular steel body which is placed on cable dia and locked with the lower base clamp by threaded steel rods on both the side. A separate earthing cable of approx. 6 mtrs. long crimped at one end with suitable lugs connected with the tool and the other end is having the earthing rod for grounding.

Sapsons Tool Bags Are Available For Various Applications And Industries. These Products Are Made From Polyester, Nylon ,cotton, canvas and leather, or any other material, as per the customer’s needs. Bags are available with or without tools. Most of our standard bags are made out of water proof Nylon material, and suitable for rouge handling. The designing of these bags are done with the convenience of use and durability, in mind. Bags can be supplied by us, as per customer’s design, on request.

Hydraulic tube pullers can be used for both continuous tube pulling as well as stub pulling. Consists of - Hydraulic power pack - Pulling gun - Hose and other consumable accessories. Salient Features - Removes tubes without any damage to tube sheet - Interchangeable pulling gun with the same power pack - Compact design of pulling gun and power pack - Available for continuous pulling of up to 3" OD, and stub pulling of up to 4" OD - Saves time and money Tube Size: 3/8" - 3" (9.5 - 75 mm) OD for continuous pulling

Under Hand Crimping Tools, put text : PL series: Fitted with jaws, Sapsons hand-operated plier-type PL series crimping tools are designed to have better metal-to-metal contact between wires and non-insulated cable terminal ends. Size: 0.5 sq. mm to 16.0 sq. mm GD series: Sapsons GD series bench-type hand crimping tool is suitable for bench-mounted crimping and production line applications. Size: 10 sq. mm to 185 sq. mm GP series: Sapsons GP series mechanical gear-powered hand-operated crimping tool is a multi-stroke tool with ratchet & pin lock, and a rapid motion with maximum handle opening of 90°. This lightweight yet sturdy tool comes with interchangeable hex-type dies and is incredibly handy for carrying out tasks in a remote setting. Size: 25 sq. mm to 400 sq. mm

SAPSONS ‘FT’ Series Foot operated Hydraulic Crimping Tools are one of our Unique design, supplied with Heavy duty Foot operated Pump - with sturdiest design, fitted over Heavy steel frame, for well-balanced operation. These are suitable for crimping Copper and Aluminium Cable terminal ends and in-line Connectors upto 1200 Sq.mm. Our FT Series Hydraulic Crimping Tools are equipped with in-built Safety release valve, to prevent the overloading, thus protecting both Pump & Crimping Head. Available Models: * SAP-FT-400 – Capacity: 50.0 To 400.0 Sq. Mm (Supplied With Set Of 9 Sizes Of Dies) * SAP-FT-630 – Capacity: 240.0 To 630.0 Sq. Mm (Supplied With Set Of 5 Sizes Of Dies) * SAP-FT-1000 – Capacity: 500.0 To 1000.0 Sq. Mm (Supplied With Set Of 4 Sizes Of Dies) * SAP-FT-1200 – Capacity: 500.0 To 1200.0 Sq. Mm (Supplied With Set Of 5 Sizes Of Dies) * Special Model Can Be Supplied With Additional Dies, As Per Customer’s Need. * Extra Long Hose Can Be Supplied With Tool On Request, At Extra Cost. The FT Series Hydraulic Crimping Tools that we provide are suitable for any heavy duty crimping applications, to be done at ground positions. Hydraulic crimping head is slim in Design, suitable for easy accessibility inside the panels and confined areas, where other tools cannot be used. Available Models: * SAP-FT-400 – Capacity: 50.0 To 400.0 Sq. Mm (Supplied With Set Of 9 Sizes Of Dies) * SAP-FT-630 – Capacity: 240.0 To 630.0 Sq. Mm (Supplied With Set Of 5 Sizes Of Dies) * SAP-FT-1000 – Capacity: 500.0 To 1000.0 Sq. Mm (Supplied With Set Of 4 Sizes Of Dies) * SAP-FT-1200 – Capacity: 500.0 To 1200.0 Sq. Mm (Supplied With Set Of 5 Sizes Of Dies) * Special Model Can Be Supplied With Additional Dies, As Per Customer’s Need. * Extra Long Hose Can Be Supplied With Tool On Request, At Extra Cost.

It is a Shaft consist of Inner Core ,Outer casing Motor Coupling and Hand piece. It is designed to penetrate in to the tube inner dia, flexibly even into the bend tubes, without damaging the inner surface of the tube, and capable of transmitting rotary power from the Power unit to the tool head or brush. INNER WIRE CORE is flexible shaft's most important working element. It is designed and constructed to meet power drive operating conditions that include torque, speed, length and minimum bend radius. At the centre of the core is a single wire around which successive multi-stranded layers of wires are wrapped. Each layer is wound in the opposite direction and at right angles to the layer directly beneath it. The direction in which the wire on the outer most layer is wound determines the direction in which the shaft is designed to rotate. OUTER CASTING made of galvanized steel strip and is internally reinforced with antifriction lining to support the wire core and resist the torque. Outer casing does not rotate but protect the inner core and the tube inner dia. HANDPIECE is attached to one end of the shaft, either detachable or fixed type, with threaded spindle to connect tool heads or brushes. MOTOR COUPLING is fitted to the other end of the shaft, either threaded type or shear pin type, connected to the main power unit. Available in 25mm(1”) , 32mm(1.1/4”) and 36mm(1.3/8”) OD with 12mm(1/2”),16mm (5/16”) and 19 mm(3/4”) inner core respectively, with various length of 6 to 22 mtrs. Long. Longer length is also available on request.

Inserting the tubes in to the Tube sheet and Baffle plates is one of the very important activity , in manufacturing of Heat Exchangers, Condensers , Chiller etc., during which the tube ends often get damaged, result into the rejection of complete tubes , most of the time, particularly in Non-Ferrous tubes. Our Tube Guides are designed to protect the tube ends and simplifying the tube insertion process. The Conical shape of the nose allows the Tube end to self align it to the holes in the baffles plates and the tube sheet. Made out of Aluminium nose with Nylon bristle tails, which hold the Guide into the tube ID ., firmly, while insertion. It can be re-used. Sizes Available For ½” To 2.1/2” OD Tubes.