'precise engineering'

Model No. Voltage 50/60 Hz Weight Approx.(kg.) SWP-110 110V 7.5 SWP-230 230V 7.5 Tube expansion job is very critical and important process in manufacturing Heat Exchangers, Condensers and coolers, which plays vital role in the performance of the equipment. Being one of the final stage applications, over expansion as well as under expansion will lead to the rejection of equipment, thus resulting into loss of valuable man hours and material cost. SAPSONS Wattage Based Fully Automatic digital display Micro controller based Torque control Panel is designed to achieve the expansion within the acceptable parameter, at ease. It ensures the uniform drive power, irrespective of any voltage fluctuations, and transfers the same torque value to the tube expander, in every cycle and expands all the tubes equally. Features : Ø Our Digital Wattage based Torque Controller is Solid state Design without any loose parts, thus noiseless and long life. Ø User friendly Design with latest micro controller chip and One Single main circuit board for easy maintenance. Ø Protection from auto start of drive, in case of power failure, to ensure the safety of operator. Ø Digital torque settings calibrated very accurately (Resolution 1 watt ) for precise torque setting and repetitive uniform expansion. Ø Unique slow start feature enables the long life of carbon brush and the electric drive. Ø Auto recognition of Connected drive thru LED display in the panel and respective wattage range is programmed automatically , to avoid over loading. Ø Setting wattage , drive current, line voltage and drive actual wattage or either displayed or can be seen thru manual press button. Ø Trip , reverse and pause time can be adjusted as per requirement, and emergency manual reverse thru push button. Ø Options for Operation of Drive is available thru Foot or Hand . Ø Both Single cycle mode ( Forward , trip & reverse ) and Auto repeat mode ( Forward , Trip, Reverse with pre-set time, Pause with pre-set time and again repeating the cycle ) is available for the convenience of Tube expansion. Ø Physical operative condition of the drive can be seen thru LED indicators. ( i.e.. forward, reverse and trip) Ø In-built Short circuit protection and Miniature Circuit Breaker (MCB) provides the protection of both Panel and drive against voltage fluctuation or short circuits. Ø Very easy to replace the main PCB by any one. Ø Designed to work between 180 to 270 volts. Ø In-built design to protect the drive from overloading ( Drawing more current). Ø Automatic digital display warning in case of tripping . Ø User friendly design to replace the spares instantly, to minimise the downtime.

Tube Wall Reducers are specialized tools used in metal forming, pipe manufacturing, and fabrication to reduce the wall thickness of tubes or pipes without changing their outer diameter significantly. These tools are essential in applications requiring precise material thickness for structural, fluid transport, or pressure-based functions. Tube Size: 3/8' - 4' (9.5 - 101.6 mm) OD

SAPSONS Double-Ended Ratchet Spanner with Hex / Bi-Hex drive at both ends is a very useful tool for productivity. Used for loosening & tightening of bolts / nuts without detaching / resetting the tool, due to its in-built Ratcheting mechanism, these tools helps to reduce the operator fatigue and increase the comfort. The range covers across flat sizes 8 mm to 24 mm and 5/16″ to 1″. We also manufacture Single End Heavy duty Female Hex, Bi-Hex and Square Drive RATCHET WRENCHES with the A/F sizes of upto 3” with long Handle for the maintenance of Turbines, Ships, and for various applications. Very Useful in general engineering industry, automobile Industries , Thermal, Gas and Hydel Power plants and mass production and servicing industries. Special Sizes as per customer requirement can be also made on request.

The Clean cut solution to removing frozen nuts. Hydraulic Nut Splitter is very useful tool for Processing Industries like Pharmaceuticals, Chemical plants, Fertilizers etc, where the atmosphere is corrosive or Industries which located near Sea-shore. In both the cases, the Fasteners often get corroded, and during routine maintenance or preventive maintenance, it is very difficult to open the Nuts, by manually or thru impact applications. SAPSONS Nut Splitters offer end to end solution of cutting frozen nuts, in such situation. Our Nut Splitter Tool is effectively used for removing heavily corroded, seized nuts quickly, quietly and safely without damaging the bolt and stud threads. Sapsons Nut-Splitter now you can easily remove heavily corroded, seized nuts quickly, quietly and safely. Fast : To remove a 90 mm nut with a torch or hammer and chisel might take upto 30 minutes. But yoy only need 20-30 seconds with our Sapsons Nut Splitter. Safe: No hammer, no impact. Operator has hands off during operation. No sparks, No Flames, No risk to volatile environments. Sapsons Nut Splitter cuts smoothly, with no flying fragments. Quiet : All you will hear is the hiss of the hydraulic pump and a reassuring " snap" when the nut is split. Precise: You can easily calibrate the cutting chisel so only the nut is split, with no damage to the bolt or stud threads. Versatile : SAPSONS NUT SPLITTER cuts through even the hardest nuts, including ASTMA194 Brinell hardness 248-352. And each model of SAPSONS NUT SPLITTER can be used for a wide range of metric or inch nut sizes. It Saves You Money : Nut removal takes less time, so downtime is reduced. And with SAPSONS NUT SPLITTER, you can avoid costly damage to bolts, studs and surrounding equipment.

Torque wrench is one of the very important tool, which is basically precision instrument, on which the quality of our job/ product depends. SAPSONS torque wrenches are manufactured , keeping this basic requirement in mind, and we take special care and precautions, from manufacturing to final testing and acceptance of the same, to ensure that there is no compromise to its quality and reliability. SAPSONS Adjustable / Preset click type Torque Wrenches are compact in design. Critical parts are made out of forged steel for long life and calibrated to an accuracy of + 3%. Available from 2.5 to 2700 NM Torque Capacity covered in 12 models with built in Ratchet Mechanism and Non - Ratchet Mechanism. Available in three different types as follows , depending upon the application, all supplied with + 3% accuracy : 1. Adjustable Click type torque wrench without Ratchet mechanism - where only final tightening is done with Torque wrench. 2. Adjustable Click type torque wrench with in-built Ratchet mechanism - where from initial to final tightening is done with Torque wrench, and for high productivity. 3. Fixed type torque wrench with or without Ratchet mechanism - where only pre-set torque is applied, repeatedly. TORQUE WRENCHES CAN BE SELECTED BASED ON THE REQUIRED TORQUE TO BE APPLIED, FROM OUR BELOW CHART... APPLICATIONS : Power Plants, Refineries, Petrochemicals, Fertilizers, Heavy Engineering Industries, Shipyards and Ship Building, Aeronautics and Automobiles. Features of 'SAPSONS' Torque Wrenches: * Sturdy And Robust Design * Guaranteed Accuracy Of ± 3% * Compact Design Facilitate Usage In Confined Areas. * Ensures Correct Torque By Click Sound, Vision And Operator Feeling * Calibrated By Electronic Calibrators To Close Tolerance, Which Are Certified By NPL. * very Torque Wrench Is Supplied With The Calibration Certificate.

SAPSONS Extra Heavy Duty Slugging / Striking Wrenches are designed for use with hammers where impact or shock loading is required for loosening of frozen and rusty nuts and bolts. These slugging wrenches are duly forged from superior grade special alloy steel. The blanks are duly machined with the wrench openings broached to close tolerance as per federal specifications and undergo a heat treatment process including stress relieving before undergoing short blasting and surface finish operations. SAPSONS Slugging Wrenches are guaranteed for superior performance and durability. Slugging Wrenches are available in – RING PROFILE- Straight Flat , Box type & Offset Handle, OPEN JAW PROFILE– straight Flat and Offset handle , STRUCTURAL WRENCHES – Both Tapered Handle and Tubular Handle types CASTELLED WRENCHES or any special profiles to suit customer’s specific requirements. SAPSONS Slugging Wrenches are available in a range of sizes from 22 mm to 230 mm (7/8" to 9.1/8") across flat. These are suitable for most rigid applications and are useful for fertiliser plants, refineries, petrochemicals, heavy engineering industries, railways, iron and steel manufacturing plants, thermal power stations, etc. Features: * One Piece Forged Construction * Extra Heavy Duty High Impact Resistant * Greater Head Deptt. * Guaranteed Against Premature Failure * Large Striking Face