SAPSONS Automatic Grooving Tool besides Catering to various applications for Internal Grooving is specially designed for Matching Grooves in Tube Sheet Holes to aid in Locking Rolled Tubes into Position during Tube Expansion. It incorporates the Proven and accepted Principle of an eccentric Tool Holder turning on its own Axis. As the Tool moves into the work piece/ Tube Sheet, the Pilot nose contacts the face of the work piece/ Tube Sheet, the cutter is now in the position to cut. Continued movement of the Tool starts the feed stroke which actuates the cutter and feeds it readily into the work. The location of cut is controlled by a quick lock Adjustable Collar, the depth of cut is also controlled by a Quick Lock-Stop Nut, which permits simple, fast and accurate adjustments. Features: 1. Accurate and Quick 2. Covers wide range of bores by simply changing cutters & pilot nose 3. User friendly easy to adjust length & depth of cut 4. Automatic two in one design 5. Form cutter and tool bit with different groove configuration can be supplied

Electronic Torque produced by SAPSONS Electric Tube Expansion Drive Unit is governed by a separate Electronic Control Panel which is adjusted by a simple Digital Display. When the Electrically Driven Motors reaches the desired Torque, the Control Unit Mechanism automatically shuts off the Power and on pressing the Reverse Button the Tube Expander retracts out from the Tube .The fully Automatic system ensures the Tubes are rolled to maximum tightness without inducing excessive cold worked stress in Tube Metal, injuring Tube ends or distorting Tube Sheet Ligaments. * SM-0 * SM-2 * SM-3 * SM-1

Model No. Voltage 50/60 Hz Weight Approx.(kg.) SWP-110 110V 7.5 SWP-230 230V 7.5 Tube expansion job is very critical and important process in manufacturing Heat Exchangers, Condensers and coolers, which plays vital role in the performance of the equipment. Being one of the final stage applications, over expansion as well as under expansion will lead to the rejection of equipment, thus resulting into loss of valuable man hours and material cost. SAPSONS Wattage Based Fully Automatic digital display Micro controller based Torque control Panel is designed to achieve the expansion within the acceptable parameter, at ease. It ensures the uniform drive power, irrespective of any voltage fluctuations, and transfers the same torque value to the tube expander, in every cycle and expands all the tubes equally. Features : Ø Our Digital Wattage based Torque Controller is Solid state Design without any loose parts, thus noiseless and long life. Ø User friendly Design with latest micro controller chip and One Single main circuit board for easy maintenance. Ø Protection from auto start of drive, in case of power failure, to ensure the safety of operator. Ø Digital torque settings calibrated very accurately (Resolution 1 watt ) for precise torque setting and repetitive uniform expansion. Ø Unique slow start feature enables the long life of carbon brush and the electric drive. Ø Auto recognition of Connected drive thru LED display in the panel and respective wattage range is programmed automatically , to avoid over loading. Ø Setting wattage , drive current, line voltage and drive actual wattage or either displayed or can be seen thru manual press button. Ø Trip , reverse and pause time can be adjusted as per requirement, and emergency manual reverse thru push button. Ø Options for Operation of Drive is available thru Foot or Hand . Ø Both Single cycle mode ( Forward , trip & reverse ) and Auto repeat mode ( Forward , Trip, Reverse with pre-set time, Pause with pre-set time and again repeating the cycle ) is available for the convenience of Tube expansion. Ø Physical operative condition of the drive can be seen thru LED indicators. ( i.e.. forward, reverse and trip) Ø In-built Short circuit protection and Miniature Circuit Breaker (MCB) provides the protection of both Panel and drive against voltage fluctuation or short circuits. Ø Very easy to replace the main PCB by any one. Ø Designed to work between 180 to 270 volts. Ø In-built design to protect the drive from overloading ( Drawing more current). Ø Automatic digital display warning in case of tripping . Ø User friendly design to replace the spares instantly, to minimise the downtime.

Hydraulic tube pullers can be used for both continuous tube pulling as well as stub pulling. Consists of - Hydraulic power pack - Pulling gun - Hose and other consumable accessories. Salient Features - Removes tubes without any damage to tube sheet - Interchangeable pulling gun with the same power pack - Compact design of pulling gun and power pack - Available for continuous pulling of up to 3" OD, and stub pulling of up to 4" OD - Saves time and money Tube Size: 3/8" - 3" (9.5 - 75 mm) OD for continuous pulling

Tube Wall Reducers are specialized tools used in metal forming, pipe manufacturing, and fabrication to reduce the wall thickness of tubes or pipes without changing their outer diameter significantly. These tools are essential in applications requiring precise material thickness for structural, fluid transport, or pressure-based functions. Tube Size: 3/8' - 4' (9.5 - 101.6 mm) OD

Sapsons SKT series knockout tools are used to punch tubes/tube stubs out of tube sheets. They're used manually or with pneumatic chipping hammer (either directly or after the collapse of tube-ends). Tube Size: 3/8"- 4"(9.5 - 101.6 mm) OD

Tube Plug are specialized tools used primarily in industries such as power generation, petrochemical, and HVAC for the installation or removal of tube plugs in heat exchangers, condensers, boilers, or chillers. Tube plugs are used to seal off damaged or leaking tubes to prevent system contamination or performance degradation. Sizes: 3/8' to 1.1/2' (9.5 - 38.10 mm) OD

Under Tube-End Facing / Chamfering Machines, replace text with: Sapsons SFM series tube end facing / chamfering machines are powerful yet portable machines designed to self-align and mount on tubes for fast tube-end facing and chamfering in constrained spaces. These are ideal for trimming condenser, chiller, and heat exchanger tubes to a specific tube projection after expansion. Salient Features - Light, portable, modular and ergonomic design - User-friendly experience due to quick interchangability of pilot - Range of tool bits available for tube-end facing, bevelling (internal and external) and weld seam machining - Available in electric, hydraulic and pneumatic drives - Saves money and inventory space, owing to a wide tube size range covered by a single machine Tube Size: 1½" - 7" (38.1 - 177.8 mm) OD

Effective cleaning of Tube Inner dia results into longer life and better performance of the vessels and Equipments. Tube cleaning brushes are used for soft , light scales inside the tubes. Bristles are made out of Nylon, steel and Stainless steel wires, as per customer requirements. Can be easily connect and disconnected thru threaded coupling. Available From 3/8” To 4” OD Tubes. TYPE : Condenser Brushes, Turk Head Brushes And Double Spiral Brushes, Etc.