Sapsons air to water intensifier/hydro pneumatic reciprocating pumps are an efficient, low cost alternative to motorised and hand-operated pumps. Salient Features: - Compact & lightweight, and can be mounted in any orientation - Low air consumption when used in conjunction with a low pressure, high discharge centrifugal prefill pump and hence, the energy consumption and time for building desired pressure is very low (There is no further consumption of compressed air once the pressure has built up) - Automatic leakage compensation to maintain set pressure - Pneumatically actuated components allow for usage even in explosive environments - Designed for use with water and other non-corrosive liquids as all parts that are in contact with the liquid are made from stainless steel and brass - Suction port can be rotated 360° for easy installation, and non-return valve assembly can be easily dismantled for quick servicing Applications - Hydrostatic pressure testing of castings, valves, hoses, pressure vessels etc. - Cyclic pressure or life testing of pressure guages, pressure switches, hoses etc. - Burst strength testing of pressured vessels such as LPG/nitrogen/oxygen gas cylinders, storage tanks, hoses, pipes etc. - Seat leakage test of control valves - Operation of single acting hydraulic cylinders used in hydraulic clamps, lifting platforms, compression moulding presses etc. - Isotactic pressing of powder metals and ceramics - Transferring of liquids from barrels, storage tanks etc. - Pumping oil/grease in centralised lubrication systems"

SAPSONS HYDRAULIC CABLE SPIKING TOOL is specially designed to ensure the absence of voltage in low voltage and Medium voltage power cables before undertaking any electrical maintenance work. Human life is precious and by using our Cable spiking tool, the safety of the Electrical team is ensured. They can simply check the Power cable and eliminate accident. What is cable Spiking tools? Cable Spiking tool is one of the Safety tools used to protect the Electrical workers from any Electrical accident while carrying out cable repair, maintenance, jointing or end termination etc... The cable spiking chisel pierces the sheath of the cable, as well as its insulation, to reach the main conductor. If the cable is powered prior to cutting, an arcing fault is caused by breaking down the insulation. Why are spike tool used? Cable spiking tool is used to ensure that the power cable under maintenance is not live. Cables are spiked with the help of Cable spiking tool and confirm the circuit is not Live. It is one of the very important safety procedure universally followed and the Cables are preliminarily spiked before carrying out jointing or terminating of faulty 11kV/33kV cables. Our Cable spiking tool is intended to prove that any power cable under maintenance is previously disconnected, is dead before starting the work, when these cables are undergoing repair, diversion or maintenance. The design of SAPSONS cable spiking tool is robust and reliable which consist of a hand operated hydraulic pump connected by a hydraulic hose to the hydraulic cylinder. The Cable Spiking chisel which is made of special alloy steel and hardened is connected to the piston of the Hydraulic cylinder. When the cylinder is operated thru the Hydraulic hand pump, the chisel pierce into the cable to reach the conductor. The Cylinder is mounted on a Rectangular shaped tubular steel body which is placed on cable dia and locked with the lower base clamp by threaded steel rods on both the side. A separate earthing cable of approx. 6 mtrs. long crimped at one end with suitable lugs connected with the tool and the other end is having the earthing rod for grounding.

Model No. Voltage 50/60 Hz Weight Approx.(kg.) SWP-110 110V 7.5 SWP-230 230V 7.5 Tube expansion job is very critical and important process in manufacturing Heat Exchangers, Condensers and coolers, which plays vital role in the performance of the equipment. Being one of the final stage applications, over expansion as well as under expansion will lead to the rejection of equipment, thus resulting into loss of valuable man hours and material cost. SAPSONS Wattage Based Fully Automatic digital display Micro controller based Torque control Panel is designed to achieve the expansion within the acceptable parameter, at ease. It ensures the uniform drive power, irrespective of any voltage fluctuations, and transfers the same torque value to the tube expander, in every cycle and expands all the tubes equally. Features : Ø Our Digital Wattage based Torque Controller is Solid state Design without any loose parts, thus noiseless and long life. Ø User friendly Design with latest micro controller chip and One Single main circuit board for easy maintenance. Ø Protection from auto start of drive, in case of power failure, to ensure the safety of operator. Ø Digital torque settings calibrated very accurately (Resolution 1 watt ) for precise torque setting and repetitive uniform expansion. Ø Unique slow start feature enables the long life of carbon brush and the electric drive. Ø Auto recognition of Connected drive thru LED display in the panel and respective wattage range is programmed automatically , to avoid over loading. Ø Setting wattage , drive current, line voltage and drive actual wattage or either displayed or can be seen thru manual press button. Ø Trip , reverse and pause time can be adjusted as per requirement, and emergency manual reverse thru push button. Ø Options for Operation of Drive is available thru Foot or Hand . Ø Both Single cycle mode ( Forward , trip & reverse ) and Auto repeat mode ( Forward , Trip, Reverse with pre-set time, Pause with pre-set time and again repeating the cycle ) is available for the convenience of Tube expansion. Ø Physical operative condition of the drive can be seen thru LED indicators. ( i.e.. forward, reverse and trip) Ø In-built Short circuit protection and Miniature Circuit Breaker (MCB) provides the protection of both Panel and drive against voltage fluctuation or short circuits. Ø Very easy to replace the main PCB by any one. Ø Designed to work between 180 to 270 volts. Ø In-built design to protect the drive from overloading ( Drawing more current). Ø Automatic digital display warning in case of tripping . Ø User friendly design to replace the spares instantly, to minimise the downtime.

Tube Wall Reducers are specialized tools used in metal forming, pipe manufacturing, and fabrication to reduce the wall thickness of tubes or pipes without changing their outer diameter significantly. These tools are essential in applications requiring precise material thickness for structural, fluid transport, or pressure-based functions. Tube Size: 3/8' - 4' (9.5 - 101.6 mm) OD

Under Tube-End Facing / Chamfering Machines, replace text with: Sapsons SFM series tube end facing / chamfering machines are powerful yet portable machines designed to self-align and mount on tubes for fast tube-end facing and chamfering in constrained spaces. These are ideal for trimming condenser, chiller, and heat exchanger tubes to a specific tube projection after expansion. Salient Features - Light, portable, modular and ergonomic design - User-friendly experience due to quick interchangability of pilot - Range of tool bits available for tube-end facing, bevelling (internal and external) and weld seam machining - Available in electric, hydraulic and pneumatic drives - Saves money and inventory space, owing to a wide tube size range covered by a single machine Tube Size: 1½" - 7" (38.1 - 177.8 mm) OD

Workshop Trolley : Workshop Trolley** is a mobile storage unit used to organize and transport tools in garages, workshops, or industrial settings. It typically features multiple drawers, wheels for mobility, and may come preloaded with essential tools like spanners, screwdrivers, pliers, and sockets. Made from durable steel, it helps keep tools secure, accessible, and well-organized for efficient work.

Air Drills: An air drill (also called a pneumatic drill) is a powerful drilling tool powered by compressed air instead of electricity. It’s commonly used in industrial, automotive, and manufacturing settings where durability and continuous use are important. Sizes: Available with 1/4', 3/8' and 1/2' drill chuck

HP series : slim-type hand-operated hydraulic crimping tools are designed for hexagonal crimping of aluminum/copper lugs as well as ferrules, and come with a built-in hydraulic pump. Supplied in a specially molded plastic carrying case, these crimping tools are lightweight, portable and easy to use, making them ideal for electrical maintenance engineers and contractors. Size: 10 sq. mm to 300 sq. mm

MH Series Electric Power Operated Hydraulic Crimping tools are available with 230 V as well as 110 V Single Phase power supply. The MH Series Hydraulic Crimping Tools are easy to carry and have compact power pack fitted with lifting handle. The MH Series Hydraulic Crimping Tools are supplied with all Aluminum body Motor for less weight and easy portability. Supplied with hand held slim design light weight crimping head, hexagonal dies, and suitable 2 meters long hydraulic hose. Electric Pumps are designed to develop Max. working Pressure up to 700 Bar. The crimping Head is Slim in design and made from Solid Special Alloy Steel to withstand the pressure developed while crimping. Available Models: * SAP-MH-400 – Capacity: 50.0 To 400.0 Sq. Mm (Supplied With Sets Of 9 Sizes Of Dies) * SAP-MH-630 – Capacity: 240.0 To 630.0 Sq. Mm (Supplied With Sets Of 5 Sizes Of Dies) * SAP-MH-1000 – Capacity: 500.0 TO 1000.0 Sq. Mm (Supplied With Sets Of 4 Sizes Of Dies) * SAP-MH-1200 – Capacity: 500.0 To 1200.0 Sq. Mm (Supplied With Sets Of 5 Sizes Of Dies) * Special Model Can Be Supplied With Additional Dies, As Per Customer’s Need. * Extra Long Hose Can Be Supplied With Tool On Request, At Extra Cost. Technical Specifications: Power Supply: 230 Volts Or 110 Volts Single Phase Tank Capacity: 10 Liters Max Working Pressure: 700 Kg/Sq.Cm Motor: 1 HP Pump: 2 LPM For special applications, with high power crimping, we have our HDX and HDZ series Crimping heads, which can be used with both Hand pump as well as Electric pumps, developing up to Max.Working pressure of 700 Bar.