Bolt tensioners are one of the unique tool to tighten the Flanges with uniform Gasket compression through out the joint. Hydraulic bolt tensioners are best option , in compare to conventional Hydraulic torquing , particularly where the high pressure joints are concerned…It helps to achieve leak free joints, high accuracy , better productivity and improving the life of Gasket joints. SAPSONS’ bolt Tensioners are synonymous to longer life, better performance, less maintenance, and most essentially, value for money. With the latest technology seals used for less down time, SBT Series Bolt Tensioners are user-friendly and versatile in their design and operations and helps in completing the job in shorter time periods. Available for both general purpose as well as for special applications, these tools find a wide applicability in Nuclear Power Plants, Wind Mills, Gas plants, Refineries, Petrochemicals Sector, Oil rigs, Construction industries, Tunneling & Mining, Hydro Power and thermal Power plants. List of Consumable Spares: * Thread Puller * Load Cell * Bridge * Nut Driver How to Use: 1. Slide The Nut Driver Into The Nut. 2. Place The Bridge And Load Cell, Over The Stud 3. Tighten The Thread Puller Over The Stud Into Each Load Cell Until Securely In Contact With The Cylinder Piston. 4. Connect The Hydraulic Hoses To All The Tensioners, As Well To The Pump Manifold. 5. Ensure That The Hoses Are Connected Firmly At Both The Ends. 6. Apply Hydraulic Pressure To The Load Cell ,Which Actuates The Hydraulic Load Cells And Apply Even Load Across The Flange By All The Interconnected Bolt Tensioners. 7. Rotate The Nut Driver Using A Tommy Bar, Till It Touches The Flange Surface Firmly. 8. Release The Tool Pressure And The Bolt Tensioning Procedure Is Complete. 9. Repeat The Same Procedure, To Tighten The Alternative Studs… To be able to deliver a leak free bolted assembly you must apply the correct amount of compressive load to the sealing surface or gasket. Salient Features of Sapsons Bolt Tensioner: * Versatile Design: SBT Series Standard Variable Tensioners Are Designed To Provide A Wide Range Of Flexibility, Covering Stud Sizes 3/4″ To 5.3/4″. Different Stud Sizes Are Accommodated By Simply Changing Adaptor Kit Consisting Of Puller, Bridge & Nut Driver, While Utilizing The Same Load Cell. * High Strength Alloy Steel: The SBT Series Tensioner Operates At A Maximum Pressure Of 1500 Bar & Utilizes High Strength AISl 4340 Steel Parts For Long Lasting Performance. * Stroke Indicator: The SBT Series Tensioner Has An Exceptional Stroke Of 15 Mm. Integral Stroke Indicator Allows Piston Stroke To Be Viewed & Measured Indication Of Stroke Is Provisioned With Over Stroke Limit Indication. * Safe Design: The SBT Series Tensioners Are Designed So That In Event Of Over-Stroke, The High-Pressure Fluid Will Be Released From The Inner Side Of The Load Cell, & Thus Saving The Operator From Possible Exposure. * Multi-Tensioning: The SBT Series Load Cell Is Provisioned With Two Connections & This Acts As Manifold For Multi-Tensioning Applications. By Using SAPSONS High Pressure Link Hoses, Any Number Of Bolt Tensioners Can Be Connected & Tightened Simultaneously. This Ensures Equal Tightening Of All Bolts In The Assy. & Reduce The Work Time. * Anti-Roll Seals: Low Frictions, Anti-Roll Seats & Rigid Backup Rings Incorporated For Improved Life And Reliability. * Floating Piston: The Unique Piston Design Allows 2° Tilt Without Any Loss Of Load, Preventing Piston Seizure Or Damage Of Piston Bore.

SAPSONS HYDRAULIC CABLE SPIKING TOOL is specially designed to ensure the absence of voltage in low voltage and Medium voltage power cables before undertaking any electrical maintenance work. Human life is precious and by using our Cable spiking tool, the safety of the Electrical team is ensured. They can simply check the Power cable and eliminate accident. What is cable Spiking tools? Cable Spiking tool is one of the Safety tools used to protect the Electrical workers from any Electrical accident while carrying out cable repair, maintenance, jointing or end termination etc... The cable spiking chisel pierces the sheath of the cable, as well as its insulation, to reach the main conductor. If the cable is powered prior to cutting, an arcing fault is caused by breaking down the insulation. Why are spike tool used? Cable spiking tool is used to ensure that the power cable under maintenance is not live. Cables are spiked with the help of Cable spiking tool and confirm the circuit is not Live. It is one of the very important safety procedure universally followed and the Cables are preliminarily spiked before carrying out jointing or terminating of faulty 11kV/33kV cables. Our Cable spiking tool is intended to prove that any power cable under maintenance is previously disconnected, is dead before starting the work, when these cables are undergoing repair, diversion or maintenance. The design of SAPSONS cable spiking tool is robust and reliable which consist of a hand operated hydraulic pump connected by a hydraulic hose to the hydraulic cylinder. The Cable Spiking chisel which is made of special alloy steel and hardened is connected to the piston of the Hydraulic cylinder. When the cylinder is operated thru the Hydraulic hand pump, the chisel pierce into the cable to reach the conductor. The Cylinder is mounted on a Rectangular shaped tubular steel body which is placed on cable dia and locked with the lower base clamp by threaded steel rods on both the side. A separate earthing cable of approx. 6 mtrs. long crimped at one end with suitable lugs connected with the tool and the other end is having the earthing rod for grounding.

Sliding T - Handle is used for driving of manually operated sockets. It has a large leverage handle which allows application of force comfortably. The final tightening can be done with both hands. The sliding T-head is provided with a ball to arrest movement of handle at any desired position. Available in 1/4", 3/8", 1/2", 3/4", 1" and 1.1/2 " Square Drives.

Model No. Voltage 50/60 Hz Weight Approx.(kg.) SWP-110 110V 7.5 SWP-230 230V 7.5 Tube expansion job is very critical and important process in manufacturing Heat Exchangers, Condensers and coolers, which plays vital role in the performance of the equipment. Being one of the final stage applications, over expansion as well as under expansion will lead to the rejection of equipment, thus resulting into loss of valuable man hours and material cost. SAPSONS Wattage Based Fully Automatic digital display Micro controller based Torque control Panel is designed to achieve the expansion within the acceptable parameter, at ease. It ensures the uniform drive power, irrespective of any voltage fluctuations, and transfers the same torque value to the tube expander, in every cycle and expands all the tubes equally. Features : Ø Our Digital Wattage based Torque Controller is Solid state Design without any loose parts, thus noiseless and long life. Ø User friendly Design with latest micro controller chip and One Single main circuit board for easy maintenance. Ø Protection from auto start of drive, in case of power failure, to ensure the safety of operator. Ø Digital torque settings calibrated very accurately (Resolution 1 watt ) for precise torque setting and repetitive uniform expansion. Ø Unique slow start feature enables the long life of carbon brush and the electric drive. Ø Auto recognition of Connected drive thru LED display in the panel and respective wattage range is programmed automatically , to avoid over loading. Ø Setting wattage , drive current, line voltage and drive actual wattage or either displayed or can be seen thru manual press button. Ø Trip , reverse and pause time can be adjusted as per requirement, and emergency manual reverse thru push button. Ø Options for Operation of Drive is available thru Foot or Hand . Ø Both Single cycle mode ( Forward , trip & reverse ) and Auto repeat mode ( Forward , Trip, Reverse with pre-set time, Pause with pre-set time and again repeating the cycle ) is available for the convenience of Tube expansion. Ø Physical operative condition of the drive can be seen thru LED indicators. ( i.e.. forward, reverse and trip) Ø In-built Short circuit protection and Miniature Circuit Breaker (MCB) provides the protection of both Panel and drive against voltage fluctuation or short circuits. Ø Very easy to replace the main PCB by any one. Ø Designed to work between 180 to 270 volts. Ø In-built design to protect the drive from overloading ( Drawing more current). Ø Automatic digital display warning in case of tripping . Ø User friendly design to replace the spares instantly, to minimise the downtime.

FEATURES & APPLICATIONS : • Used to cut conductors up to 40 MM DIA • Operation similar to a hydraulic jack • Knob-handle is turned to enable lineman to operate pump handle • When cut is completed, knob is turned in opposite direction to allow cutting head to open • Epoxiglass pole, handle and hydraulic hose have been tested upto 700 bar working pressure. • Hydraulic oil grade 68 is used in Hand pump. • Hose has a minimum burst strength of 15,000 PSI • Features include jaws designed to cut without flattening conductor. • Jaws are made out of special alloy steel for long and trouble free application • Well balanced, requiring minimum effort to cut large conductors.

Ratchet Wrench : A ratchet wrench is a hand tool used to tighten or loosen nuts and bolts efficiently without having to lift and reposition the tool after each turn. It features a ratcheting mechanism that allows the handle to move back and forth while the socket stays engaged with the fastener. Sizes: 3/8' to 1/2' square drive with maximum torque capacity of approximately 120 Nm.

Condenser Tube Cleaner Kit is Pneumatic operated system, designed to clean straight tubes in Heat Exchangers, condensers, coolers, chillers etc. These equipment contain many small diameter tubes which vary from 3/8" to 1.1/4" in diameter and six to twenty feet or even more in length. Consists of Portable Pneumatic Drive, Water Flushing Attachment, Set Of Hollow Shafts and Couplings, Cleaning Heads Like Drill, Cutter and Brush along with air and Water Hoses, all supplied in suitable steel carrying case. The suitable cleaning head according to the tube ID, is connected thru thread in to the hollow shafts , which is again connected to the Pneumatic drive, and inserted into the tube. Number of shafts are connected thru couplings to increase the length , to cover the entire length of the tube, to be cleaned. A water flushing system is also attached to the drive to flush out the loose deposits out of the tube as well to keep the tool head cool. The Pneumatic drive runs at a speed of about 700 RPM , along with the water flow, and the tool head breaks the scale, while the water loosens the deposits. Very Handy and user friendly, this equipment is very useful to those Industries, where periodical cleaning of tubes are mandatory.

Inserting the tubes in to the Tube sheet and Baffle plates is one of the very important activity , in manufacturing of Heat Exchangers, Condensers , Chiller etc., during which the tube ends often get damaged, result into the rejection of complete tubes , most of the time, particularly in Non-Ferrous tubes. Our Tube Guides are designed to protect the tube ends and simplifying the tube insertion process. The Conical shape of the nose allows the Tube end to self align it to the holes in the baffles plates and the tube sheet. Made out of Aluminium nose with Nylon bristle tails, which hold the Guide into the tube ID ., firmly, while insertion. It can be re-used. Sizes Available For ½” To 2.1/2” OD Tubes.

A foot operated switch is a pedal-style control device used to activate or deactivate machines, tools, or electrical equipment using your foot. These tools are designed to improve workflow efficiency, precision, and safety, especially in hands-busy environments like workshops, factories, medical facilities, and construction sites.